I put my tv on and the volume wasn't. Working and its not that the volume is on mute

Check your remote control to see if the buttons are working properly. Or go into your unit's settings and check what the volume default is set to - It might be set to prevent it from going lower or higher.

Check whether the audio is muted or not. If audio is muted, there will be no sound output. Refer its user manual for details. If it is not muted, check its speaker/s first. If found OK, check and replace damaged component/s at its audio out put card, or replace it as card basis. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" will make surf easy.
http://electronicshelponline.blogspot.com/

You have to program the remote to your specific TV.

Does your TV have a "half-mute" setting:
* press MUTE once to reduce the volume to 50%
* press MUTE a second time to reduce the volume to zero
* press MUTE a third time to restore the volume to 100%

?

hi
we can't hear the volume in videocon tv.do you know how to solve this problem

Sounds like they are not touching the board inside the remote. for that take the remote apart reposition the board inside of it (careful not put fingers on board, sides only) make sure they are working and then put the remote back together.

Well, without knowing the exact model of tv and remote, I can just give my best guess.
Try using the volume up/down on the TV and / or the remote.
On the TV, try pressing both the volume up and down at the same time.
Stick the remote right in the face of the TV (direct in front of the remote sensor) and hit the mute button.
Try tapping the mute button in very short single bursts rather than pressing it for a half second like you would any other button.
If any of those work, please come back and reply with the model of the TV and remote, because someone somewhere probably has the same issue and would love to have it solved!

Could be a contact piece of the MUTE button from your remote that is causing it.
Go out and Big Lots or Radio Shack to get a cheap universal remote control(big lots would be between $5-$10) Pick up the code for it,and when the tv happens again,your the OLD remote MUTE button to turn it back on and then put away this remote control and use the new universal remote control.
However,if the problem is coming from the manual MUTE button on the TV,you need a repair tech, to fix it!
solutiondoct

Good day.

Please check on the speakers of your unit. They may be busted.


chris

Try changing the batteries. Most times the "tivo" buttons will work but the "tv" buttons will stop working when the batteries are low.

If you have done that, go back into settings and program the remote again for your tv, then give it a shot.