His is the message i get from my vista-running computer after installation of DCP 330C: Failed to start the Control Center. The required registry information is missing. Please re-install the Multi-Function suite. (CC3-001-00001904)

Brother DCP-330C paper jam

Please check the scanner driver of DCP-330P on your computer. It may has not installed yet. A new printer usually equipped with necessary drivers. Please install it on computer and seek for scanner after installation and follow further info on your screen. You can also use scanner and copied sheet from printer.

The error message "Print Unable 46" is an indication that the machines ink absorbers are almost full. The ink absorbers hold liquid and dried ink after it has been purged from the print head. These absorbers can control enough ink for the expected life of the machine.

There is a possibility that this message may have occurred in error. Upgrading the firmware of the Brother machine may resolve the issue. Follow the procedure below to determine if a firmware update is required:
-if the display screen is displaying an error message, press the STOP/EXIT key to change the LCD to the main screen.
-press the # and * key at the same time. The first 2 characters on the top row will determine the ROM version.

If the ROM version is OE or greater (example: OF, OG, OH, etc), the firmware does NOT need to be upgraded. If the ROM version is OA, OB, OC or OD, follow the procedure on this link to upgrade the firmware.

If the message "Print Unable 46" continues to appear on the display the Brother machine after completing the firmware upgrade and your machine is within warranty (even if it's not under warranty you have to do the same thing), you have to take it to a Brother Authorized Service Center. http://welcome.solutions.brother.com/BSC/public/us/us/en/faq/faq/000000/002600/000059/faq002659_000.html?reg=us&c=us&lang=en&prod=mfc290c_all&Cat=11

Did you disable the User Account Control and tried installing the Software completely?? You will have to uninstall all the previous version Applications and then disable the UAC and install the application,.

first uninstall the MFL Pro Suite & all the componants, shut down and restart system fresh install MFL Pro Suite fro the original CD supplied.

The follow procedure requires driver setup.
Ensure first that you have the original disk for your printer, if you do not have it, then download printer driver from Brother: DCP-330C: Downloads: Drivers.


Start unplugging all cables from printer and also unplug computer power cable.

Restart computer with printer unplugged.

On computer go to Control Panel installed printer and remove printer.

On printer, open all doors, look for paper stuck inside and for foreign objects.

Plug back printer to power but not to USB yet, if it flashes red already then the printer is faulty.

On computer, run the Printer software installer from disk or from download. Start driver setup with printer USB not connected.

When asked by software setup wizard connect the printer USB.

Try procedure above twice.

If still no luck the printer is defective, in that case call the phone number listed on the owner manual.

Good luck.

Download the uninstall tool: then when you remove the printer drivers/software, go to the web and reinstall from there.
Uninstall tool:
http://welcome.solutions.brother.com/bsc/public/agreement2.aspx?lang=English&dlfile=/BSC/Public/files/dlf/dlf000014/Delinfe.EXE&viewmode=0&guid=0126ee75-158a-400c-9d41-0de1d98b836b

Drivers:
http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/dlf/000000/002600/dlf002697.html?reg=us&c=us&lang=en&prod=dcp130c_all&type2=1&os=74&flang=8&dlid=dlf002697


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

I guess I found a solution for the problem.
I also got this error message after installing ControlCenter3. Failed to start ControlCentre3 - re-install software, with the error No CC3-001-00001907. The numbers at the end can change, but that's not important.
I have two laptops running vista. I got this error with the 1st laptop. Then I tried it with the second laptop, it worked fine. That made me think: On the first laptop I had tried to install the ControlCenter3 from the CD, but it turned out that the CD did not support Vista. Then I got the vista driver/ControlCenter3 package from the Brother website. This is the one that did not work on laptop one. What I then guessed was, that I had some ugly remains from the installation of the old driver (not for vista). I started cleaning the registry. First of all I run the driver uninstall program from Brother (free from their website) then I cleaned the registry with CCleaner (freeware). Still that was not enough. I started the regedit program and started searching for the term Brother. It was still there in about 10 or more places. I deleted all records that were connected with my brother printer (a DCP-130C). Then I run CCleaner once more. Then I installed the vista driver package (from brother website). Restarted and voila: it worked. ControlCenter3 workes fine now. I started the ControlCenter3 update (also on brother website) and finally with the scanner utility put the scanner resolution limit up higher. That's it.
Before working with the registry make a backup, please.
This procedure should also work for other brother printers using the controlcenter3. It should also work for other systems than vista.
Cheers, hope this was helpful.
Edi

You might find new drivers and answers (faq) here:
http://welcome.solutions.brother.com/BSC/public/us/us/en/model_top/colormfc/dcp330c_all.html?reg=us&c=us&lang=en&prod=dcp330c_all

BTW: You have to connect the USB cable directly to your Pc. Otherwise the scanner will malfunction (connection via hub).

Did you download the vista drivers or the xp drivers?

Info for vista drivers:

http://www.brother.com/E-ftp/windowsvista/us.html

 

download the drivers here:

http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/download_top.html?reg=us&c=us&lang=en&prod=dcp130c_all

 

check the update for control center, too.