I set a password for my bushnell out door camera but now it says "erro" whenever I try to use it and the default doesn't work either. Is there a way to reset it.

the first time the camera is used the code should be 0000 unless previously changed,try removing and reinstalling the batteries,this hould start your set up again.
press and release the power button and wait for 4 H's,"HHHH" to appear,this may give you another chance to use 0000 or whatever you chose as your password.press enter after each digit,then press enter again.the indicator should display PASS.if it displays ERRO then it is the wrong password.there is a password recovery service provided by Bushnell at 1-800-423-3537 and press option 2,you will need to provide your serial number to the representative.

hope this helps.

when yo see the key icon blinks hold enter and then push enter and put in 66214 and the camera mode will come on

To reset the password:

Turn unit on and wait for password prompt
Depress the and hold the enter button until camera switches into 5-digit password mode _ _ _ _ _.

Trail sentry systems will not indicate 5-digit mode on the screen, but will indicate _ _ _ _ instead of HHHH .

Press enter to confirm 5 digit mode

Enter 5-digit code 66214 and press enter button( trail sentry cameras will accept a 5th Digit after the 4th digit is entered in the _ _ _ _ screen.

Camera will now go into operating mode, and user can now program a new password from the setup mode.

Follow this link to see the user manual PDF:

http://www.bushnell.com/manuals/trail-scout/119000TrailSentry_manual.pdf

brian_artz77 email him and he will send you all the instructions you need to fix your camera it fixed mine perfectly. ya who.

Hello, Brian Artz here,

I have received hundreds of e-mails on this password problem. to many to reply to so i will post how to gear up all of us trophy takers..

1. TURN ON UNIT AND WAIT FOR THE SCREEN TO SAY PASSWORD

2. PRESS AND HOLD THE ENTER BUTTON UNTIL THE CAMERA SWITCHES INTO THE 5 DIGIT PASSWORD MODE,

##NOTE## SENTRY CAMERAS WILL NOT INDICATE A 5TH DIGIT MODE ON THE SCREEN BUT WILL SHOW
"_ _ _ _"

3. NOW PRESS ENTER TO CONFIRM 5 DIGIT MODE

3A. THE CODE IS "66214" FOLLOW THE PASSWORD ENTRY PROCEDURE AND PRESS ENTER AFTER THE LAST DIGIT "4"

4. CAMERA SHOULD NOW SAY PASS AND YOU CAN NOW CONTINUE TO PROGRAM A NEW PASSWORD YOU WONT FORGET THIS TIME

forgot my pass number on my bushnell trail scout 119900 plese assist

I can solve these issues in about 2 minutes. email me @[email protected]

I have the same problem the only solution I have been able to find so far is that you have to send it back to Bushnell with Proof of Purchase and they will reset it.

Fuzzy

its asking for the master password

According to Bushnell's Website in their FAQ section for Trail Cameras:

Category - Trail Cameras Posted: 02/15/2005 What should I do if I have forgotten my password? If you have forgotten your password, the product will need to be returned to our repair center. Click on the 'more info' button below for instructions on returning your product.

Here is the link to the specific page:
http://www.bushnell.com/customer_service/cffaq/faq_main.cfm?faqT=answer&qid=124&catID=14&Keyword=password