I'm using dlink di-634m router, now i'm trying to block facebook but i don't know how. i tried using schedules, firewall setting but still my staff can get access to it.

Your user manual: http://www.dlink.com/-/media/Consumer_Products/DI/DI%20634M/Manual/DI_634M_Manual_EN_UK.pdf
Help: Connected Wireless Client List
Firmware for router: Link DI 634M Firmware 2 01 Free Download

No, sadly it doesn't support WDS (Wireless Distribution System), most of the time I prefer Linksys routers since are easy to configure and WDS capable, if you get two of them I'm sure you can establish a WDS network easily.

Try RESETTING the D-Link back to the default settings.
Press and hold the RESET button at the back of the routerwith the power ON until the LEDs flash at the time the release the RESETbutton.
Connect a LAN cable from the D-Link to your laptop/computer's LAN port, openthe browser on your laptop/computer and enter the D-Link's configuration URL..
http://192.168.0.1
The default login = admin
The default PW = blank (just press Enter) You can now change the default password.
You can now configure the wireless settings. To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Heres a link to the support site http://www.dlink.co.uk/cs/Satellite?c=TechSupport_C&childpagename=DLinkEurope-GB/DLTechProduct&cid=1197319378173&p=1197318962293&packedargs=locale%3D1195806691854&pagename=DLinkEurope-GB/DLWrapper
Quick setup from here ftp://ftp.dlink.co.uk/di_broadband_gateways/di-634m/di-634m_qig_100.pdf user manual from here ftp://ftp.dlink.co.uk/di_broadband_gateways/di-634m/di-634m_manual_100.pdf
Connect the PC to the router by cable then to log into the router using the default settings

• Open the Web browser.
• Type in the IP Address of the Router http://192.168.0.1).
• Type admin in the User Name field.
• Leave the Password blank.
• Click OK.

now goto the wireless settings on the router to see the settings being used

• If this solutions solves you problem, please do not forget to rate my solution.
• If not, then please comment back so I can help some more

Yes this router has a port forwarding capability, to know about that and how it is done from this router check this link.
http://portforward.com/english/routers/port_forwarding/Dlink/DI-634M/DI-634Mindex.htm

Make sure you have the ipx and spx protocol install on the wireless adapter.

http://support.dlink.com/faq/view.asp?prod_id=2229&question=DI-634M

- Take a visit.

No. Here is the help guide:
http://support.dlink.com/Emulators/di634m/help_men.html


copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

If it doesn't work, that's a problem with the router's firmware. You must update the firmware of your router.

Hi,

If I understand your post/description:
1. You have both wired and wireless clients tied to the DLink DI-634M router;
2. The 1st PC is a desktop that uses Ethernet connections to the DLink and is currently working;
3. You have another (2nd) PC (a laptop?) that is connect by WiFi to the router. This is not working now;

I think that your issue may have to do with the Wireless networking of your 2nd PC, i.e. if you can access 192.168.0.1 (DLink DI-634M) from the 1st PC that is wired.

Should this be the case or the scenario is different, pls post back.

Hope this be of initial help/idea. Pls post back as requested or should you be in need of additional information.

Good luck and kind regards.