Can you please supply a manual for my Philips 37" flat screen full HD 5000 series TV

Philips 40PFL3706/F7 Widescreen 3000 Series 40" (102cm) Full HD 1080p Digital LCD TV
Price $499.19

Philips 40PFL3706 F7 Widescreen 3000 Series 40 102cm Full HD 1080p Digital... 24 7 Locksmith Orchard Park NY 716 710 7400 Locksmith Orchard Park NY

check your lcd lap drive to see if you have power to the lamp drivers

hi,
There is problem with the back light of your tv. In LCD tvs CCFL are used as back light to give light to independant pixels. CCLF lamps required high voltage to light. This high voltage is provided by the inverter board inside ths tv. If any one of the chopper transformer (high voltage transformer) have some problem then the inverter will shuts off itself preventing damges to the power supply.

You have to check the 24V from the power supply. If its ok the you have to check the inverter board.if avilabe replace the same. if you are not able to do the same i will prefer to consult some one experienced in it. Back light inverter board will look like one in the picture.

ok

Change the input your connected to

If there is picture in the TV then probably it is the protective screen that has cracked and not the picture tube.Please check carefully.

This is an easy fix using the Philips remote control that came with your tv. On the center of the remote is a dial that has left right up down controls. Stand in front of the tv and using those controls you can recenter the screen and get rid fo the green line. I had same problem when we hooked up hd satellite reciver to philips 37 plasma

If that TV has a 'menu' button on the front of the set, make sure nothing like coca-cola has spilled into where that switch is located. I would try a different remote in case the remote is getting flaky....

May try to replace your power supply. Average cost runs $200 via Internet. Also may inspect test & replace deformed an or any bulging caps.

Philips 37PF7320A 37 no power but the green light is on

The TV is in some kind of protection mode, the blinking LED show you an error code.
Try pressing 062596 and then press menu button (do these in quick motion, don't let them to time out while keying)...see what happens
Well I think that if you would have a service manual for this set that would help a lot, I can send it to anyone who wants it via email/gmail. Let me know if anyone want one.

I also heard that this problem appeared with some people because the of the burnt fuse in the TV. To fix that it has to be taken to the tech shop.

And yes I also heard about this issue many times, seems like this TV set is very popular with this kind of problem.