At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
konica 1350W status light constant green, error light flashes, printer prints fine but error light just continues to flash. I've shut down the computer repeatedly, printer repeatedly, unplugged printer. How do I get the error light to cease flashing?
jackkonica 1350W status light constant green, error light flashes, printer prints fine but error light just continues to flash. I've shut down the computer repeatedly, printer repeatedly, unplugged printer. How do I get the error light to cease flashing?
jack
AnonymousSep 25, 2008
I do have the same problemI do have the same problem
AnonymousMar 30, 2009
error button flas, and does not print
error button flas, and does not print
AnonymousApr 29, 2009
Erro light flashes and the printer won"t pring.Erro light flashes and the printer won"t pring.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You have to see how the led is blinking and to compare with the table
that explains every blink what means. If you don't have this table,
contact me and I'll send it to you.
Chip reset device for Konica Minolta Bizhub and CF imaging units http://www.chipreset.eu
You have to see how the led is blinking and to compare with the table that
explains every blink what means. If you don't have this table, contact me and
I'll send it to you.
Chip reset device
for Konica Minolta Bizhub and CF imaging units http://www.chipreset.eu
You have to see how the led is blinking and to compare with the table that
explains every blink what means. If you don't have this table, contact me and
I'll send it to you.
Chip reset device
for Konica Minolta Bizhub and CF imaging units http://www.chipreset.eu
You have installed a refilled cartridge without changing the chip on the bottom of the cartridge. Your error light will flash and also upon starting your computer, you will probably get an error screen saying the bi-directional connection is disabled. The printer should still work, but will be slow because it recycles between each page. My error light has been flashing for some time, but when I send a document to the printer, the error light stops flashing and the printer prints. After the print job is done, the error light resumes flashing. The only real solution is to replace the chip on the toner cartridge with a new one.
konica 1350W status light constant green, error light flashes, printer prints fine but error light just continues to flash. I've shut down the computer repeatedly, printer repeatedly, unplugged printer. How do I get the error light to cease flashing?
jack
I do have the same problem
error button flas, and does not print
Erro light flashes and the printer won"t pring.
same problem :(
error message service call 0050
service call 0300 in KONICA MINOLTA pagepro 4650 PCL
×