Question about Televison & Video

1 Answer

Universal Remote control code on Sharp 13H-M60

Am using a universal remote and need the code on this TV to enter into the remote. I don't know what it is i need the tv codes for a sharp mts stereo model # 20k 5100 I am using a philips pocket remote look like a cell phone sharp "36 # 360-F500

Posted by on

  • Bob Citizen May 11, 2010

    Have you looked on Phillips website under "remotes"?

  • Anonymous Mar 12, 2014

    Need code for setting GE remote to sharp tv

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 97 Answers

Http://www.remotecodelist.com/remotes/magnavox/Philips-Magnavox_PM525S.pdf
This is the user's manual for a Phillips remote control. There is a list of codes in it. They should be rather universal. There's also instructions as to how to program it. I believe that there is a way to program it without using the codes.

Programming with Code Search

1. Manually turn on the device (TV, VCR, etc.) to be controlled.

2. Press and hold Code Search button until the red indicator stays on. Release the Code Search button.

3. Press and release the desired mode button (TV, VCR, etc.). The red indicator blink, then stays lit.

4. Press the Channel Up button repeatedly (up to 300 times) until the device could be controlled changes channel. The red indicator blinks, then stays lit. If you accidentally overshoot the code required, press the Channel Down button to backtrack through the library until the device changes channel. Pressing Channel Up changes direction to forward again. Press and release the Mute button to install the code.

Hope this helps :)

Posted on Jun 20, 2008

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need the Code to the RCA Universal Remote to Opporate my Orion MTS Stereo T.V.


0182,0190,0112. Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name list" in alphabetical order. Pull up older posts.
http://electronicshelponline.blogspot.com/
http://electro-medical.blogspot.com/
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/
Search the site by type in the brand name to your device, in the "Search box at the top right of the display window" to see the set-up codes to your device, with different brand remote controls.

Jan 24, 2016 | RCA Televison & Video

1 Answer

I have a new sharp aquos tv LC 60LE633U. Remote is broken but have a universal Phillips remote anyone know the code ? Help please


Hello
Three digit universal remote codes for Sharp tV are:
004/ 009/ 079/ 095/ 111/ 112/ 114/ 122/ 123/ 124/ 173
Four digit codes are:
0079 0123 0063 0020 0004 0009 0226 0266 0006 0095 0122
Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

Feb 28, 2012 | Sharp Televison & Video

1 Answer

I have a Sharp TV/DVD. I need to prgram the Universal Remote control ( Radioshack cat no 15-302) for the tv. I don't knwo the code, can you help me?


Hello
Setup codes for Sharp TV with Radioshak 3 in 1 remote control are:
004/009/079/095/111/112/114/122/123/124 & 173
OK.

Aug 22, 2011 | Radio Shack 3 in 1 Universal Remote

1 Answer

Need sharp tv code for ge universal remove


how to enter tv codes for my magnavox tv from my sharp remote

Mar 23, 2010 | Universal Remote Control GE174Universal...

1 Answer

What remote code is used with RCA remote for a


why dont you use rca's code search feature,Hold code search button untill lighted,press tv button on remote,then slowly momentorally press the power button on remote untill tv goes off,then press enter right after the tv goes off,there are abouy 200 codes on the rca remote control,so be patient.

Nov 24, 2009 | Sharp Televison & Video

1 Answer

H ow do I program my remote to my tv? I have an RCA universal remote. Model # RCR412S. I lost the user's guide and need to program my new tv to my remote. I have a 42' Sharp tube tv.


The site below helped and gave me the following information:
http://remotefinder.rca.com/default.aspx?site=rca




Code For Model RCR412S
Code 1006 for Sharp TV Code 1012 for Sharp TV Code 1026 for Sharp TV Code 1095 for Sharp TV Code 1111 for Sharp TV Code 1112 for Sharp TV Code 1171 for Sharp TV Code 1173 for Sharp TV

Jul 09, 2009 | RCA Universal Remote Control

1 Answer

My grandmother needs the code her GE universal remote to operate her Sharp TV. Thanks


MANUALLY ENTERING CODES
1. Manually turn on the device (TV, VCR, DVD, etc.) you wish to
program.
2. Press and hold the CODE SEARCH/SETUP button on the remote
until the INDICATOR LIGHT lights, then release.
3. Press and release the button for the device you are programming
(TV, VCR, DVD, etc.). For AUX, press AUX then the device button
you are assigning to AUX. The INDICATOR LIGHT will blink then
remain lit.
4. Enter the three or four digit code for your device using the number
buttons in the GE Universal Remote. After your code is entered the
INDICATOR LIGHT will turn off.
5. Aim the remote at the device (TV, VCR, DVD, etc.) and press the
POWER button. Your device should turn off.
Note: If your device does not respond to the first code listed,
repeat steps with the next code. If none of the codes listed for your
device work for your device or your brand is not listed, try the Code
Search method described below.

Possible codes, seeing as each tv is different you will have to try until one works, the third list is for models bought before August 2002

found all of the below info at http://www.jascoproducts.com/support/universal-Remote-codes.asp

SHARP .... 0079 0123 0063 0020 0004
....... 0009 0226 0266 0006 0095 0122
SHARP
591, 604, 729, 671, 679, 684, 809
Sharp
004, 006, 012, 029, 095, 111, 112, 113, 122, 171, 173


Let me know if you have any questions, please don't forget to rate my solution after you fix the problem

Apr 25, 2008 | Televison & Video

2 Answers

Universal Remote control code on Sharp 13H-M60


Your remote should have come with a sheet of paper with all the codes on it for different TV's, VCR's, , etc.

Sep 03, 2007 | Sharp 13H-M60 TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

1,747 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76204 Answers

Cindy Wells

Level 3 Expert

6063 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...