Question about Wacom Graphire4 6x8
Go to this page:
Choose Graphire 3 or Graphire 4 as your tablet model. These are the CTE models. Then pick your OS and download the driver.
Posted on Sep 03, 2009
Testimonial: "Problem solved! thank you veary much"
Ok so I called costumer service because mine was doing the same thing. Apparently the pressure sensor in the pen is stuck down. What you do is remove the pen tip with tweezers, blow in the open end of pen, then tap the pen (open end down) in a table to get any debris out of there. Then just put the tip back in and give it a try. That did the trick for me. Hope this helps.
Posted on Aug 24, 2010
SOURCE: Tablet stopped working
Normal 0 If you are running a ‘tower’ PC ensure the tablet is plugged into a USB port at the back of the computer. The USBs at the front of your computer may not provide adequate voltage.
Posted on Sep 23, 2008
I'm having this same problem with my original Graphire (ET), with a replacement pen that's less than two years old.
I don't think it's a driver issue, based on the indicator light on the tablet itself. It turns green like it's detecting a click when either end of the pen is brought near the tablet. To me, that suggests an issue with the pen hardware. The mouse has no such problem.
I'd be very interested if anyone has a solution to this.
Posted on Jan 08, 2011
Tips for a great answer:
May 04, 2011 | Wacom Bamboo Fun Small (CTE450) (CTE450S)
Apr 04, 2011 | Wacom Bamboo Fun Small (CTE450) (CTE450S)
Nov 15, 2010 | Wacom (PTZ930AC) Graphic Tablet
Aug 16, 2010 | Wacom Intuos3 Graphic Tablet
Feb 23, 2010 | Computers & Internet
Feb 15, 2010 | Wacom Graphire3 Studio Usb (cte-430/b1)
Jul 15, 2017 | Wacom Graphire4 6x8
May 22, 2009 | Wacom Graphire4 6x8
Usually answered in minutes!
Step 2: Please assign your manual to a product: