Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then configure wan settings and lan settings enable wireless if you want to use wifi Then save settings and restart router Then connect cable from internet service provider to WAN port of router and connect ethenet lan cable from computer to lan port of router. . Let me know if you need further assistance. Thanks for using FixYa.
Click "Apply Changes". Your new password is now active.
Note: Do not forget the new password and keep
it somewhere safe. If you forget your password, you'll be unable to
access your router's settings. If you forget or lose your password,
you'll need to "restore to factory default". This will reset the password to its default, as well as erase any and all other settings you may have changed.
92 views
Usually answered in minutes!
×