Clock i have a pioneer premire cd player and i know where the clock botton is but i cant figure out ho to set it

Hey mate,

There is a generic way of doing this for all pioneer headunits give this a go... If you turn the unit off then while it is off just hold the function button in it may just have func writtin on it then it should bring up a secondary menu with your date and time and to turn subs on or off

See how you go hope this helps

Brad:)

most you hold down the time button and push up or down. try something similiar, hold down a button and push an up button? just play with it but don't reset it andcause more problems

1 Use MULTI-CONTROL to select
CLOCK SET.
2 Press MULTI-CONTROL to display the
setting mode.
# Press BACK to return to the previous display.
3 Press MULTI-CONTROL to select the segment
of the clock display you wish to set.
Each time you press MULTI-CONTROL, one
segment of the clock display is selected.
Hour—Minute
As you select segments of the clock display,
the selected segment blinks.4 Turn MULTI-CONTROL to put a clock
right.
# You can also perform the same operations by
pushing MULTI-CONTROL up or down.

http://www.pioneerelectronics.com/PUSA/Products/CarAudioVideo/Source/CD-Players/DEH-P3500?tab=D

Upper right-hand corner, there's a button next to the "eject" button. Pressing this button while the unit is on will cycle between displaying the clock and the track number & play time (CD) or clock & radio station.
When the unit is off, you can press the same button to completely shut off the display, which is sometimes nice if you don't want the blue ring around the volume knob glaring in your face.

Here is a link to the manual:
http://akamaipix.crutchfield.com/Manuals/130/130DEH1800.PDF

From the Pioneer Electronics website; How do I set the clock on my single CD player? For most Pioneer single CD players, you can set the clock using the following steps: 1.Press and hold the SOURCE button until the unit shuts off. 2.Press and hold SOURCE again until the clock appears. With some models you will press and hold the FUNCTION or AUDIO button instead of the SOURCE button. 3.Press the left or right arrow to select the segment of time you wish to adjust. 4.Press the up or down arrows to increase or decrease the numbers in the blinking segment. 5.Once the clock is set correctly, press the SOURCE button to exit.

hey... i hope this it worth a 100% vote lol.. Premier CD PlayersHow do I set the clock on my single CD player? For most Pioneer single CD players, you can set the clock using the following steps: Press and hold the SOURCE button until the unit shuts off. Press and hold SOURCE again until the clock appears. With some models you will press and hold the FUNCTION or AUDIO button instead of the SOURCE button. Press the left or right arrow to select the segment of time you wish to adjust. Press the up or down arrows to increase or decrease the numbers in the blinking segment. Once the clock is set correctly, press the SOURCE button to exit.

turn your unit off by pressing the SRC button. then press the clock button (clock appears). press the audio (or function button) and then the hour blinks. press up or down to change setting and left or right to switch from hours to minutes. press audio button. wallah!

When the set is off press the large knob in the middle and this will activate the menue to adjust the clock/time and a few other bits