Have Aiwa TV MODEL No. TV-A209 The problem that I am suddenly facing is that I can't change channels or volume or use any other function. I can't even turn it off with remote control. Its stuck randomly on a particular channel that I was watching at that point of time. Along with that channel it now shows a message in flashing red color that reads :- AGING O6895H Now when I press ''Display'' button on remote control volume goes off and this code is shown :- S123 K234 Y 000 001 1 The numbers in the second line can be navigated by ''CH+'' button and changed between 0 and 1 by ''Vol+'' button. I really don't know anything about this. So, please help me out of this problem. Thanks.

Main system control IC fault. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Its main system control memory IC is damaged. Replace it with same number. This IC is a very small one, having 8 solder terminals, and can be located very near to the main system control IC. Usually start with a number 24C**. Check and replace it. If you wish to get more details, surf this link. http://electronicshelponline.blogspot.com/ There are more than two thousand and four hundred posts. All are related to television and other domestic electronic equipment service help.

This problem has been answerd a few while ago.

Hello
Check your remote control hanset for proper functioning. Get into this link to know more about the faults and repair to remote contorls.
http://www.fixya.com/support/r10192276-cleaning_remote_control_handsets

If remote control functions proeerly, the front panesl switches to be suspected. If any one mong the microswitches inside got strucked, all functions will be distrubed. it will be best to follow any more after replacing these microswitches. These switches can be located just behind the control panel of the tv, soldered diretly to a printed circuit board. You have to replace all of the at the same time. Just undolder one amoung them as as sample, when you go to buy for a new one.
If this also does not help you, repalce its memory IC. This IC can be located very near to the main system control IC, will have 8 solder terminals. A very small IC and wont cost more. Eventhough it is very small, function of it when the set works is great. Replace it. When you buy this IC, make a keen look on it number. It is very important when replacing this IC. All these components stated above, can be bought from most of the electronic spare part selling shops st your town. OK.

Dear Sir, I have AIWA c142ske TV. No remote functions are working, even manual switches are also not functioning, It got stuck on One channel, The error which is coming on screen is

I am also have the same problem.

please provide solution if any one have.

thanks in advance

you can lock/unlock above functions by pressing zoom and negative volume control keys simultaneously.

I have Aiwa TV MODEL No. TV-A149
The problem that I am suddenly facing is that I can't change channels or volume or use any other function. I can't even turn it off with remote control.

Its stuck randomly on a particular channel that I was watching at that point of time.

Along with that channel it now shows a message in flashing red color that reads :-
AGING
6EDEH

Now when I press ''Display'' button on remote control volume goes off and this code is shown :-
S123 K234 Y
100 000 0


The numbers in the second line can be navigated by ''CH+'' button and changed between 0 and 1 by ''Vol+'' button.

I really don't know anything about this. So, please help me out of this problem.

i can solve ur prob by your self but u have to pay for that.

First, the remote:
If you have a cell phone with a camera, aim the remote at the cell phone, so you can see the front of the remote on the cell phone screen. Press a button on the remote, and see if you can see it blinking through the cell phone screen. If you can, you know the remote is working.
Now, the TV:
Have you programmed the channels in? Run the setup function on the TV to auto-search for channels. It should automatically program all the channels it's currently receiving.
Hope that helps. Please report back and perhaps I can help more.