GE Profile Radiant Range - ran the self cleaing, door locked, opened the door, now the element keeps heating (with nothing selected). Any ideas? Heat is not up to cleaning temp, but is hot.
OK, I have the same problem with my oven heating even though it's turned off. This started after normal use, not the self-clean. My model is a GE JKP56BD1BB double oven built-in range. Only the bottom oven heats, the bottom oven is off.
I have replaced the oven control (and yes it is expensive) and the top oven continues to heat continuously.
What's next? These parts are expensive.
IS THIS A DIGITAL RANGE,IF SO REMOVE THE TOP BACK COVER AND SEE IF ANYTHING ARCED(BURNED SPOTS) ON THE CONTROL BOARD,IF NOT DIGITAL, YOUR OVEN KNOB SWITCH IS STUCK IN CLEAN MODE,I HOPE IT'S NOT THE CONTROL BOARD AS THEY RUN ABOUT $200 ,LET ME KNOW-MIKE
408 views
Usually answered in minutes!
I had to turn off the breaker to reset the cleaning evolution, after many hours of door locked. Seems the heating element never turned off completely, and it is still running. The oven does not show anything selected.
Yes, this is digital. Has knobs for the radiant burners, but for the oven it is digital. I will check the board. Thanks. Dave
If it is the board, is it difficult to replace, or should I call a repair company?
I tried to just set the temp and start the oven but we got a LOUD POP, so I turned it off at the breaker.
I have the exact same senario as rseeg. Only my unit is a JBP65GV1WH.
×