Model #42PFL5432D/37 Not receiving power? when

Model #42PFL5432D/37 Not receiving power? when the tv 1st went off the red pr. light was flashing dimly and you could hear buzzing sound,but no voices . Nothing at all now.

1 Answer

Anonymous

Contributor 22 Answers
Posted on Nov 03, 2010

Anonymous

Contributor

Joined: Nov 03, 2010

Answers

Questions

Helped

6225

Points

I was a tv engineer for many years quite a while back now and when a led is flasing or pulsing it usualy means the tv's power supply is in over current mode wherebye it shuts down to prevent any further damage due to a part of the circuitry drawing excess current, high voltage transformer etc, you need to get a techie in, sorry.

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1helpful

1answer

How can i fix my Philips model 42PFL5432D/37 Flat screen TV that powers on, but no picture.

The main board to your TV is faulty. It is best to contact the authorized service center for Philips; because, it will be very difficult to get the main board to Philips brand TVs, and after the replacement, a firmware update too will be necessary. This is a skilled work. http://electronicshelponline.blogspot.com/

Read full answer

Jul 27, 2015 • Philips Televison & Video

0answers

Philips 42pfl5432d 37

Read full answer

Be the first to answer Apr 14, 2014 • Televison & Video

1helpful

1answer

Philips 42pfl5432d/37 tv chirps when power is on

Usually stems from a short on the power supply board. I have a 37MF337B/37 37" that had the same problem. Turned out the set had 5 leaky capacitors and a shorted diode on the power supply board.

Read full answer

Jan 10, 2013 • Philips Televison & Video

0helpful

1answer

I have a 42 inch LCD Phillips (42PFL5432D/37). The TV will not power up and the power button is flashing red and is making a chirping sound. Please Help.

I'm having the exact same problem with the exact same TV... capacitors are all good. I suspect a diode. will report back

Read full answer

Dec 03, 2010 • Televison & Video

4helpful

2answers

42PFL5432D/37 WONT COME ON DEAD/NO POWER LED DISPLAY/2 YEARS OLD

An issue i came across with this particular model tv was there were two (2) 3300 micro-farad 25v caps on the power board that have gone bad, preventing the tv from starting up. I replace those two capacitors and it started right up! I suggest having a tech do it, unless u have experience with electronics. I cannot be held responsible for any damage done to your tv, warranties voided, or shocks you may receive. but that should get it to start back up.

Read full answer

Dec 17, 2009 • Philips 42PF9631D 42 in. Plasma Television

0helpful

2answers

Philips lcd tv 42pfl5432d/37 no picture

based on what you clarified and my experience I'd bet the problem is in one of the inverters, most likely the main inverter.

Look at the board part number - it's usually imprinted on the board itself - and look on eBay or Google for it.

Another way to go about it is to type in the model number (usually without /37) followed by the word "inverter", e.g. "42pfl5432d inverter".

My search yielded result board number VIT70023.80 and from there you start searching for this on eBay...find a reputable seller (like me, except I don't think I have it) and buy it.

It might be the slave inverter, it might be the master, but from what you describe it's more likely the master.

It's possible to nail it down, but it will require multimeter and some extra time.

Hope that helps!

Read full answer

Nov 15, 2009 • Philips Televison & Video

0helpful

2answers