I have a samsung digital camera l201 accidentally full when I check the LCD image is white can I check LCD connection inside give some guide to check the connection at LCD.

Greetings.
To resolve this problem you need to replace the ribbon cable inside the lens shutter.
For the unprepared person, unfamiliar with the repair of cameras - a difficult task. Such work can perform any repair.
For self-repair is necessary:
1 soldering iron, solder, flux
2 Tweezers
3 Screwdriver, small
4 Device for capacitor discharge flash
5 optics for if poor eyesight

Skills:
1 Reading the manual repair
2 The ability to solder
3 understanding of the mechanics of the lens (you must correctly parse and then properly assemble the mechanical part of the lens)



Flex -
Flex Samsung shutter L201 digital camera


Manual -
Samsung Digimax L201

Unlikey, but just to be sure, head to Settings / Reset to set all the camera settings back to factory default, and see if that solves your problem.

may be problem with following datacable antivirus check if device is enabled in device manager virus attacks

The gear inside the lens is stuck, maybe some grit or sand got in there preventing it from operating.

http://www.samsung.com/us/support/online/supportOnlineServiceRequest.do

The above is a service request to have the camera repaired.

Do what the pros do...use a card reader.

I have just started having this same problem, which was in brilliant timing for my best friend's wedding, cheers Samsung!!

I'm sorry you have listed this product as a KODAK brand.
I understand you have a Samsung. I suggest you re-submit your question again under Samsung in order for a Samsung expert to look at your question.
TXS

well, maybe the LCD got wet inside it, have it a look and ask how much it can cost. The LCD is the one that previews the display, and the display itself... once you break it, you need it replaced.. hope this helped you out!

hi..
Sounds like a loose ribbon cable -- the one that connects the screen to the circuitry inside the camera.
Try squeezing the body of the camera near the bottom 'Samsung' logo, to try to snug-up the connection. Brace the front (under the lens) with your index fingers, and press firmly with your thumbs on the back over the logo just under the screen.You might try squeezing around the other edges of the screen for good measure in case something else came loose.


thank u
rate me

hmmm seems as if the LCD did take a heavy hit there and some connecting parts inside the LCD in the camera is damaged however this shouldnt affect how the camera performs but you can maybe still have the camera serviced at a best buy or other store that fixes cameras