SOURCE: TV has sound with no picture display
Is it possible the pip and the main picture have been swapp and the main picture is showing as the Pip?Is a possibility,check it out and let me know.
SOURCE: Tatung V30DMTT 29.6 in. LCD... Problem: Faulty Power Board
Hi -I had the same problem with my tatung LDC tv. PIECE OF !@$#$#@#!!. Not knowing a whole lot about electronics, I decided well, I couldn't break it anymore, and I thought it was probably the power supply as the tv did NOTHING!!! it wouldn't light up make noise or anything. it was totally dead. I called around MANY, MANY local tv repair shops and NO ONE would work on this as they didn't have the repair parts for it. Thats what I get for going cheap. Anyway, well, I popped the back off, carefully making sure I knew where each screw went if I ever had to put it back together. Well, I located the power supply - it's pretty obvious, I removed it with a few screws and then found a company in california that repaired power supply's - I sent it off not knowing if it would solve the problem, but they quoted me $75 dollars and I figured if it didn't work $75 wasn't too much of a loss - and they said I could return it and get some of my $75 bucks back. So, I shipped it off to them. A couple weeks later, I got it back and installed it and to my amazement it worked!!! It has been working GREAT ever since. There is a few places online that sell the power supplies and offer a refund minus restocking fee if that doesn't work. Check out http://www.shopjimmy.com Good luck and hope this helps scott
SOURCE: Tatung Power Supply Repair
Can u tell me very u live and whats pincode of your are so that i can solve ur problem..
SOURCE: tatung lcd 42
This is a known Tatung Issue. If you still have your warranty, deliver it to the repair shop. They will fix it in a day.. That's what I did
SOURCE: Tatung wont turn on
I have v30dmtt 29 inch tatung and had the same problem. I took the power supply out and took it to repair man. He told me it couldnt be fixed. I contacted the manufacturer and had a new one sent. The phone # is 915-771-7554 but you need to call 1-888-482-8864 to get a case #. It costs 70.00 for a new power supply unit.The part # I needed was 6693006610. I hope this helps.
85 views
Usually answered in minutes!
×