When i plug my camra in it says check connections , how can i fix this problem?

I would recommend holding down your lock button and your home button at the same time and your phone will restart. That might solve your issue. If not, I would take it to the Apple Store to get it replaced or to see if they could fix it.

read your owner manual section troubleshooting contain a
LOT information for any question and help.
However you can contacts your supplier or factory from phone+chat
for Support.

God bless you

read your owner manual section troubleshooting contain
a LOT information very Explicit
or contact your supplier for support via chat or phone.God bless you

Try NOT connecting your camera to your computer.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use Nikon Transfer or any other photo cataloging program.

Get a card reader. Insert your card in one end and plug it into a USB port on your computer.

once out of the camera & deleted form the card, the camera will not display any of the images because it does not have that function. even jpeg images being the same format cannot be viewed.

go to the camra start camra the press option then setting then flash on

Since this is a new computer, the problem is most likely that the software isn't the right version for your new computer. You need to get the latest version of the software. You can download the latest version of EasyShare software from Kodak.com

Check to make sure your battery pins are touching the connections on the battery. You might have to bend them slightly towards the battery to make a better connection. Else, I would get in touch with Fuji's support team. Good luck. -JHOBBS

buy another camra copy the sofwere cd an then return tha camra