I have wrt150n. I have intermittent connection. I changed from verizon to optimon. Someone please assist. Connection is fine via ethernet.

You can try to reset your router
Reset the Linksys WRT150N wireless home router if you are experiencing connection issues or have forgotten your customized router login information. Resetting the Linksys WRT150N will erase your Internet connection settings, wireless security preferences and all other personal settings from the router. This procedure will restore the WRT150N back to its factory state.
Instructions
1 Locate the "Reset" button on the back panel of the router. The button is situated to the right of the Ethernet ports and to the left of the power port.
2 Press and hold the "Reset" button.
3 Release the "Reset" button after approximately five seconds. The device resets

Tips & Warnings
Use the Linksys WRT150N setup CD-ROM to run the setup wizard and reconfigure the router after the reset.

Hi

Though Belkin play router has a USB port on it, it would not accept the input via that port there by you can not connected the USB connection from Verizon to the router. You need to switch from USB connection to Ethernet connection on the Verizon modem contacting verizon.

IF you are using a Wireless Router and having intermittent Connection then change the Wireless channel of your Router to 9 and also check the firmware version of the router, it should always run on the Latest version.

Is there any computer connected to the router ?
If not then you will need to connect the computer
to the router.
Do not change any wireless settings on the router
with the wireless computer.
you will need to connect the computer to the
router with the Ethernet cable.
check the IP address of the computer.
open the router set up page of the router.
Here you can change the wireless settings of the
router.
Now once you change the network anme and security
on the router, you will need to connect to the
wireless network on your wireless computers.
Click Here for step by step instructions

Wellll....since it seemed an impossible task, I tried the next best thing.
I bought a wireless adapter for the other pc and voila! they are on the internet, and I am returning the router.

Westell modem + Verizon DSL w/usb = No connection to router.

ask you ISP what are the IP address and DNS server address that you need to feed in the properties setting of the TCP/IP setting in the Network Connection wizard in Control Panel
without these the connection will not work

First off thanks for using fixya.com

Second, I too am a dd-wrt user and found a similar problem when using dd-wrt with my IPCOP. You may want to go into the "Security" section of your dd-wrt and disable any fire walling or access-restrictions. Since you are already running zonealarm. Or remove zonealarm if you plan to use dd-wrt as your firewall.

Running multiple firewalls will slow down your network/Internet traffic.

Hope this helps you out.
Jei

• The router needs to be configured with the settings required by your ISP which is Verizon.
• The modem should be connected to the Internet port of your router.
• Verify with Verizon if you're connection is DHCP or PPPoE. If it is PPPoE then you should have a username and password from Verizon.

Please update me about this to assist you further with the installation of your router.

If you spoke to someone from tier 1 support, you probably won't get much help. Ask for at least tier 2 support if you ever call them back. You may not have a defective router. Have you installed any programs that may have interfered with the router? Have you scanned your pc for viruses? Why don't you have Verizon send you a modem/router combination. That way, you will only have one unit to connect and you will encounter less problems.

Hi,

If you connect by using LAN port (RJ 45) you don't have to install driver. However USB connection will require driver. Do you have Ethernet adapter installed to you iMAC? If you have it will be resolved easily without using USB port. Check the following link for connection instructions
http://www.fixya.com/support/p200812-paradyne_6211_a2_200_router/manual-18800/page-18

If physical connection is successful you can go to internet browser type 192.168.1.1 and check your modem's settings. Please post if you need further assistance

Good Luck