Question about Bose Acoustimass 10 III System
You can directly get the same PCB( 266664-001)from below website
Posted on Nov 01, 2010
You could always take it off circuit board and then unwrap the windings this would give you the ratio ,look at teh front circuit and see hwere the feed comes from so you then know the input voltage as it must be on the AC side of the circuit because as wel all know you cannot transform a DC current so if its 220volts input the out will be whatever the ratio is ,so 10/1 ratio would be say 10 volts in and 1 volt out ,easy to work out if have some idea how to do it .i would imagine that if your stateside then its 110v input and around 9-- 16v output of a max of about one amp
Posted on Oct 31, 2010
Tips for a great answer:
Aug 06, 2015 | Bose Acoustimass 10 Series IV Home...
Aug 31, 2010 | Bose Acoustimass 10 III System
Oct 28, 2009 | Bose Acoustimass 5 III System
Aug 06, 2009 | Bose Acoustimass 10 III System
Nov 29, 2008 | Bose Acoustimass 15 System
Aug 13, 2008 | Bose Acoustimass 15 System
May 29, 2008 | Bose 321GS Series II System
877 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: