Forgot lock code for lg ax245 need assisstance

If you are referring to your puk code you can call your network provider to request for a new one. If you are referring on the lock code, the best option you can do is to restore your phone to factory settings.

I’m happy to assist further over the phone at https://www.6ya.com/expert/ramy_d9e7ebea3891f482

Steps to Reset Settings This will reset the phone to factory default settings.

1. Unlock the touch screen by dragging Slide up to unlock up and touch the Menu Quick Key.
2. Touch Settings.
3. Touch Phone Settings.
4. Touch Security.
5. Enter the four-digit lock code. The default lock code is the last 4 digits of your phone number.
6. Touch Reset Default.
7. After reading the warning message, touch OK.
8. Touch Revert.

for Steps to Restore Phone visit my Blog

http://pcgadgetdeni.blogspot.com/2013/02/factory-reset-lg-vn271-extravert-to.html

Shut off your phone. Hold the lock button, the up volume button, and the camera button. It should come up with a screen for factory reset. You may lose all your contacts. But you'll have your phone unlocked. Try to lock it with a simple code this time or a simple pattern.

You can unlock your LG AX245 mobile from network lock using unlock code...Once you unlocked it you can use any gsm network sim card in your mobile at any country...I found an unlocking service at here www.unlocking4ucom and unlocked my mobile successfully.This is the online service which offer the code at reasonable cost...Through this can unlock your mobile easily...

Hi chris9975,

i have some tips hope this helps :D

you can enter your code in the following way. LG Android Phones
Start your LG Optimus GT540 Android Phone
Click the icon to open the phone dialer
Enter 2945#*540# and press send
Enter the provided unlock code (which you have purchased)
Click 'Unlock' , then it's done.
Your LG Optimus GT540 must be unlocked now, have a good day! LG Phone Problem and Solution

you can unlock it and switch over to another network , if you want to unlock, you can get codes here http://www.theunlockarena.com/supported-phones/rs13wp7/
you need to specify the country and network provider

If you have not changed it, then the security code is just the last 4 digits of its telephone number.

If you have changed it, though, then yes, you'll have to contact your carrier.

Default unlock code is 0000

el vx5200 esta bloqureado el cel

Locking and Unlocking the Device: FOR LG CU 400

1. From the standby screen, press Menu.
   
   
2. Scroll to and select Settings.
   
   
3. Scroll to and select Security.
   
   
4. Scroll to and select Lock Handset.
   
   
5. Select desired option:
   • When Power On
   • When Smartchip Changed
   • Immediately
   • Off
     
     
6. Enter the Security Code, press OK.
   NOTE: The default security code is 0000.
   

Setting the PIN Code:

1. From the standby screen, press Menu.
   
   
2. Scroll to and select Settings.
   
   
3. Scroll to and select PIN Code Request.
   
   
4. Scroll to and select On.
   
   
5. Enter the PIN code, press OK.
   NOTE: Default PIN code is 1111.
   

Changing the Security Code:

1. From the standby screen, press Menu.
   
   
2. Scroll to and select Settings.
   
   
3. Scroll to and select Change Codes.
   
   
4. Scroll to and select Security Code.
   
   
5. Enter the current Security Code, press OK.
   NOTE: The default security code is 0000.
   
   
6. Enter in the New security code, press OK.
   
   
7. Confirm Security Code, press OK.
   

IMPORTANT: If the incorrect lock code is entered more than 3 times the phone will display "ENTER PUK". If this message is displayed contact Customer Care.