AEG Lavamat 72640 Front Load Washer Logo

Related Topics:

Posted on Jun 10, 2008
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Washine machines is it possible to operate a AEG OKO LAVAMAT 6100 Digitronic hot and cold fill washing machine on cold water feed only

  • Anonymous Sep 17, 2008

    so how do I set water setting to Cold/cold?



    Thanks

×

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Apr 28, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Apr 28, 2010
Answers
1
Questions
0
Helped
395
Points
4

Yes. There is a part that allows you to connect the cold water supply to both the hot and cold inlet hoses. It has worked successfully on our 6100 for 8 years or so. I think it was part of the original kit rather than a subsequent purchase - it's a Y-shaped yoke with an inlet connection and two outlets that accept the two hoses feeding the inlets of the machine. From memory i tink the situation is mentioned in the user manual somewhere.

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

  • Master 487 Answers
  • Posted on Jun 10, 2008
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Joined: Apr 15, 2008
Answers
487
Questions
3
Helped
222943
Points
1216

Only if you put your water setting prior to washing to Cold/cold.

Otherwise it aint possible

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Where is the filter for die AEG lavamat 538 washing machine and how do you clean it?

Hello,

The only filter/screen I am familiar with is the one in the hoses the supply hot and cold water to your machine. They should be checked once in a while but I have never found much in them.

However, the manual for your machine is located here:
AEG OKO LAVAMAT 538 Operating Instructions Manual

Best wishes,
Joe

I’m happy to help further over the phone at https://www.6ya.com/expert/mark_7bbaa7a1174e0903

0helpful
1answer

What means c1 on aeg oko lavamat 74500

Hello!

Error C1 on AEG Lavamat usually means that there is a trouble with water filling. The required water level is not reached.

I reccomend you contact your local Service
Force Centre.

Here is the link to a manual of a similar AEG Lavamat waching machine (a "trouble shooting" part). Hopefully, it will help!
http://manualsbrain.com/ru/manuals/1793433/?page=30
0helpful
1answer

My 12 year old AEG OKO LAVAMAT is making a grinding sound when it fills. It's fine at all other times. I've tried cleaning out the filter, and running it empty.

This is usually caused by the recycling pump running empty whilst the washing is still soaking up the initial fill water. as the water begins to soak the clothes it then starts to pass through the drum into the pump and the whole thing quietens down. running empty will not work. to test this theory try opening the drawer very slightly and filling it manually with a hose before starting the machine, (ONLY TO THE NORMAL LEVEL) and see if the noise is still as bad.
1helpful
1answer

Hi my AEG OKO-LAVAMAT 88830 is about 10n years old. Today I was cleaning my machine. I filled the machine up with water on the rinse cycle then turned it to pump. I did this a few times as I have had a...

Hi from retired Englishman in SW France,

According to my list for AEG Lavamat washers, 'C3' stands for 3 possible causes 1 'safety flood device operated' (I suspect it means that it has sensed some water in the bottom tray. Not an easy job to do but I would check for a leak underneath), 2 'pump fault' and 3 'module fault'. Sorry I can not be of more help ;-0(

If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck!
John C.
0helpful
1answer

I have a AEG AKO LAVAMAT 6100 DIGITRONIC washing machine. The soap & fabric conditioner doesnt dispense.Can you help me please?

AEG AKO LAVAMAT 6100 DIGITRONIC washing machine. The soap & fabric conditioner doesnt dispense This video will show you how to keep your soap draw clear and how to service the parts
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.
And don't forget to like us on facebook
10helpful
1answer

Aeg oko lavamat 72600 update, ce error code showing any idea?

error code ce is a faulty water distributor fault . you have to replace the top part of the soap dispensor compartment. sometimes you can hear a clicking noise when its trying to operate
13helpful
1answer
0helpful
1answer

About mid cycle, a significant amount of water leaks out of the bottom. No error message comes up and the machine continues functioning. Machine is AEG oko lavamat 72640

Could the machine be overfilling due to a faulty pressure switch (controls the amount of water in the drum). Splits in the door seal or broken pipes?
0helpful
1answer

I have an AEG Lavamat 6100 Digitronic washing machine. Has given great service but drum has stopped spinning. Has the motor failed or are the electronics gone. Machine fills, empties and otherwise...

possibly the motor brushes. check for continuity across the brushes but remove elec connections first.
brushes are easy to replace but you may find it easier to remove the motor. before replacing brushes, check condition of commutator as well
2helpful
6answers

Aeg oko_lavamat 508- not enough water

Have law level water problem in my clothes washing AEG Lavamant OKO 508.
Not finding what you are looking for?

405 views

Ask a Question

Usually answered in minutes!

Top AEG Washing Machines Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

Are you an AEG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...