The picture is wavy with the image looking like 3D when you aren't wearing 3d glasses.

A 3-D glass won't be effective; especially in Bangladesh. A 3-D mirror; which look like a (kaleidoscope) is needed to see images in 3-D; in your country. Look for that.

You have to put the TV into 3D mode to view it by pressing the 3D button on the remote. Before you press that button, look at the screen... if you see two images side by side, then you would choose SBS... if the images are one on top of the other, then it is the over/under mode, or with Vizio,Top/Bottom option which is the "TB" icon. Once you have chosen this, the screen will inform you to put on your 3D Glasses.

Trutech remoto codes

i would check the user manual if it were me. Here´s the an excerpt from the manual.

* For more detail on usage of 3D Eyewear (Power button and Accessories etc.), please refer to operating manuals for the purchased 3D Eyewear seeing it differs depending on the type of 3D Eyewear (Model No. of 3D Eyewear).
Wearing the 3D Eyewear Turn on the 3D Eyewear Put on the 3D Eyewear
View When the HDMI receives information in which 3D mode is detected, 3D images are automatically displayed according to the signal. If the 3D images are not displayed correctly or the images cause discomfort, the images can be adjusted by "3D format select" or "3D settings". ? Change the view 3D?2D, 3D settings (p.25)
After Use Turn off the 3D Eyewear. After using the 3D Eyewear, store it in the case provided.

@nah9

You can tell if you're 3D glasses are working if you can see if the images in the movie or the game that you're playing pop-up in and out and you can see a depth and float as you watch.

If you have a 3D enabled PC, you can test it yourself by running a sample stereoscopic 3D test application here. You could also find additional information here.


Cheers

need to replace convergence control chips

it sounds like your convergence is off.

you have Red, Greed & Blue projection guns
through your menu's you will find adjustments for them ...

set your green first then align then red and then blue to the green..

when making this adjustment the tv should put up a caliration signal called a crosshatch
a matrix of H and V lines to align

Projection TV sets are known to have two common problems. The first problem that is common to these sets is convergence failure. When this happens the TV will usually look 3D, Wavy/Distorted, etc. It may also shutdown and blink an error code.

The second common problem with Projection TV sets is dull video, halos around objects, white looking video, or red overpowers the screen. This is commonly caused by the fluid in the lens being clouded overs.

You can find more details and solutions here on Fixya at the following link below. Or click HERE


http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

I had a repairman replace the convergence boards. The picture is fine now however red & green colors are messed up.

you have to replace all 3 ic's and 2 are stk 392-110 and the 3rd one is stk 392-150 they are located on the extreme right of your tv on a long heat sink all 3 are located there.You can get replacements as well as free tech online support at
http://servicemanuals.vstore.ca/