Question about Dacor Epicure 30" Double Wall Oven, Stainless Steel - E0230SCH Electric

Open Question

Have EO130SCH Dacor wall oven. Just used self clean feature, now "U60 Cooling Fan" appears on screen. What's that mean? Can't find in owner's manual.

Posted by jburich on

Ad

5 Related Answers

Rotu

Douglas Henry

  • 175 Answers

SOURCE: Display reads U60 Cooling Fan - oven won't heat

The code is telling you that the oven has sensed a fault in the coling fan circuit of the upper oven. Dacor has had a few problems with the cooling fans in these new ovens since theyve been out, so most likely you will have a bad fan motor. If that is the case, be prepared to have the repair person have to pull the oven out of the wall to get to it and change it. If its a realy board problem (less likely) than that can be changed from the front. Call up Dacor and find an authorized servicer in your area since it will still be under warranty. Good Luck!

Posted on Feb 06, 2007

Ad
localwonder

Michael Masters

  • 6784 Answers

SOURCE: what does f8 on dacor self cleaning oven mean

HI. This will generally be an issue with either the wiring at the door switch mechanism, or the door switch itself. Check the door lock switches and wiring. If the wiring is connected well, this will lead to a failed door lock switch mechanism. Use my procedure below to confirm switch failure.


Before repairs or further testing can begin you must disconnect the electricity at the fuse panel, at the circuit breaker panel, or by pulling the plug. Make sure the power is off before proceeding. Once access is gained, set the latch to the "clean" position and test for circuit continuity at the terminals of the switch with your VOM's ohmmeter function. If there is no continuity, the switch is faulty. Use cuation when testing.

Posted on Jan 05, 2010

Testimonial: "thank you very helpful "

Ad

Anonymous

  • 2 Answers

SOURCE: Display reads U60 Cooling Fan - oven won't heat

I got Dacor to give me the number sequence -- - push "cancel" and "#" at same time - when screen asks for "service ID" enter "S1234" (get "S" by pushing "7" 5 times) - screen will list "U60 Cooling Fan" as number 1, so select "1" - select "clear all", this should clear the error - hit "cancel" to get out of that screen
Hope this works for you! Best suggestion I have is DON'T BUY DACOR!! We also own their 30" dishwasher, which has been a nightmare experience as well.

Posted on Jan 13, 2010

SOURCE: dacor oven self cleaning instructions?

Go to link below and get the manual for your model. http://tv.manualsonline.com/ex/thread/view/idThread/1185347

Posted on Mar 10, 2010

Anonymous

  • 1 Answer

SOURCE: Dacor error codes

I had the error code F 0.
I unplugged it and plugged it back in.
This fixed my problem.
Here is a link to Dacor's error codes.
http://www.repairclinic.com/0078.asp#Dacor

Posted on Mar 12, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a KEBI17DBL8 Oven that will not work after using the self clean cycle. Should I get the thermostat replaced or but a new oven?


No, no need to get a thermostat or replace the unit...yet.

sounds like a tripped hi-limit thermo.

that model number looks like a double oven wall unit, correct ? if so, big job. if not awesome. if it is, it's hard only because these are heavy. (alot of techs like myself have "wall oven carts" that allow me to remove it fairly easy) you might not have to pull it out though if it's not a wall oven, my bad.

however, I think it may be the older unit's manufactured by "Dacor". if so the limit switch on most of those ranges is a "non-resetable" style. meaning you'll have to replace the themal cut-out or aka thermal switch.
*FIRST, unplug the unit or shut off the breaker.
the hi-limit is located by the latch/lock assembly, so you'll need to dismantle the unit to a degree. if it's a free standing range, it's pretty easy. lift the top and the latch/lock access panel is located right there.

you'll need to determine the "why" as well of course. did the cooling fan/blower fail (#4173004), or the cooling fan therostat (#4173008) ?

the part number you'll need for the thermal switch failure replacement is #814505. check the old one by ohming it out first of course.

hope that helps,

good luck

Sep 26, 2009 | KitchenAid Ovens

2 Answers

Im getting this message u60 cooling fan can some one tell me the meaning? Thanks


FixYourBoard.com will test and remanufacture the relay oven control board in this model. Each rebuild comes with a two year warranty.
Reach out to us at 512-355-1108 or [email protected]


fixyourboard 101559 repair-undefined-undefined-0_8.jpg

Aug 21, 2009 | Dacor MCS130 Millennia Electric Single...

1 Answer

U60 Cooling Fan message on Decor MOV130


First, try to clear the code. To do this you must push and hold # and 'cancel' at the same time until the screen asks for an ID code. Then type in (using the key pad) S1234 (you get S by pressing 7 five times) Then simply press 'clear all' and the code should disappear.

Add a comment

  1. noavatar.png
    • 530gonzo
    • 51 seconds ago
    If that doesnt work then pull the oven from the wall by removing the door and unscrewing the stainless steel trim. Pull the oven straight out and attatch the pull handles to pull it completely out. Next, place the oven on a secure stand (such as a milk crate). Then turn off the breaker to all electricity in your kitchen and confirm the power is off. Then, using a 'Torx' brand bit, take off the sheetmetal cover on top of the oven. Download a service manual to your oven and check power to the fan as described in the manual. You can find service manuals on the web (do not use owners manuals) Next, check power at the Hall effect sensor as described in the manual. You just need a volt-ohm meter to do these tests. The manual describes it well. If these tests confirm the fan is not defective, you need a relay board. Dacor part #101559. I got one for $165 last week from Dacor. 99% of the time this is the problem and the boards are even back-ordered. Dont be critical of Dacor, the ovens work well. My advice is just to buy the extended warranty when you get one. Like any high performance machine, they run well if cared for by experts.

Mar 21, 2009 | Ovens

1 Answer

Our Dacor Millennia wall oven will not heat


There is a manual reset button behind the vent under the touch pad. Turn off the power. Open the door. Remove the vent. Behind the latch is a two wire switch. press the red button on it until it clicks. reassemble and turn on power. It over heated when the power went off by stopping the cooling fan.

Mar 04, 2009 | Dacor MCS130SS Millennia Electric Single...

1 Answer

Dacor ECS230 Epicure Electric Double Oven


You probably tripped a safety thermostat in the back of each oven. If you turn off the breaker and find a way to pull the units out you could probably remove the rear panel and reset the thermostat by pushing in a button on the back of the open thermo. Some thermo's aren't resettable though so you'd have to buy a replacement.

Sep 22, 2008 | Dacor ECS230 Epicure Electric Double Oven

2 Answers

Display reads U60 Cooling Fan - oven won't heat


I got Dacor to give me the number sequence -- - push "cancel" and "#" at same time - when screen asks for "service ID" enter "S1234" (get "S" by pushing "7" 5 times) - screen will list "U60 Cooling Fan" as number 1, so select "1" - select "clear all", this should clear the error - hit "cancel" to get out of that screen
Hope this works for you! Best suggestion I have is DON'T BUY DACOR!! We also own their 30" dishwasher, which has been a nightmare experience as well.

Apr 09, 2008 | Dacor ECS230 Epicure Electric Double Oven

3 Answers

Display reads U60 Cooling Fan - oven won't heat


The code is telling you that the oven has sensed a fault in the coling fan circuit of the upper oven. Dacor has had a few problems with the cooling fans in these new ovens since theyve been out, so most likely you will have a bad fan motor. If that is the case, be prepared to have the repair person have to pull the oven out of the wall to get to it and change it. If its a realy board problem (less likely) than that can be changed from the front. Call up Dacor and find an authorized servicer in your area since it will still be under warranty. Good Luck!

Feb 05, 2007 | Dacor Millennia MOV130 Electric Single...

Not finding what you are looking for?
Ovens Logo

Related Topics:

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dacor Ovens Experts

Paul Bade

Level 3 Expert

1666 Answers

Vincent G
Vincent G

Level 3 Expert

2363 Answers

ray gallant

Level 3 Expert

71004 Answers

Are you a Dacor Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...