Describe your maytag mdb7100awb Problem: It doesn't dry dishes

see this causes and fix it. God bless you

Float Switch

The float switch may be hung up and this can cause the dishwasher to be stuck in a cycle. Check the tutorial and the video for checking this part.

Timer / Control

If your dishwasher gets stuck in a cycle first try shutting off the breaker for at least 5 minutes if this does not correct the problem you will need to replace the timer / electronic control.

try pushing the heated dry then sanitize buttons 4 times. one then the other in quick succesion. all lights should come on,, this is a test and will take about 8 min. let it go thru this and then try your washer. make sure you run hot water at your sink before you wash dishes in the future.

Use the heated dry and do leave the door open a crack after each wash and you should have no issues.

Hi,
Check your heating element..

Dishwasher Problems The Heating Element not Working
http://www.fixya.com/support/r4589033-dishwasher_problems_heating_element_not

Dishwasher Maintenance
http://www.fixya.com/support/r4319937-dishwasher_maintenance

heatman101

Asker's Testimonial " expanation very clear. will give it a go and see how simple it was. thanks Ronnie " - ronnieshomes

The problem is hard water. www.dishwasherfilter.com has a product to solve this problem once and for all. It filters the water going into your dishwasher and removes the hard minerals that leave those spots. It is very affordable and even has a money back guarantee. You will love the way your dishes look with this product.

Hi,
Check your heating element..

Dishwasher Problems The Heating Element not Working
http://www.fixya.com/support/r4589033-dishwasher_problems_heating_element_not

Dishwasher Maintenance
http://www.fixya.com/support/r4319937-dishwasher_maintenance

heatman101

alot of times this is a simple problem which can be fixed by the 3 step prevention method.
1. fill your rinse aid orjet dry compartment untilit is full.
2.turn on water so the temp can be the best temperature going into machine. do this b4 you start the machine.
3. add the correct soap.
once all 3 is covered the machine is satified and should function correctly.
let me know if this helps by sending me a 4 thumbs up post. thanks

What problem is the "high current' you mention causing?

Many dishwashers continue to heat the water to a higher temperature to wash and rinse the dishes with. They turn the heat strip on to do this, which causes the dishwasher to pull more current.

sounds like a bad wash motor.

what was the main problem