Kitchen Appliances - Others Logo
Posted on Oct 22, 2010
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

My pitco frialator fryer's pilate wont stay lit

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on May 24, 2013
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: May 24, 2013
Answers
1
Questions
1
Helped
286
Points
1

Sound like a thermostat< the pilot heats this an sends a mini current to the valve to remain open alongs as this mini current is maintained> fauly pilot will not provide mini current> you can bypass the system but not worth it, these parts are cheap and easy to replace

Angel Joseph Jr.

Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

  • Pitco Frialator Expert 685 Answers
  • Posted on Jun 10, 2011
Angel Joseph Jr.
Pitco Frialator Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Joined: Mar 14, 2011
Answers
685
Questions
0
Helped
219547
Points
932

Check the thermopile, it should be free of soot or any form of dirt. Pilot flame quality must be good. Gas pressure should meet the requirement as stated on the nameplate.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Pitco fryer pilot light wont stay lite

The thermocouple is bad or the pilot light is not adjusted to heat the thermocouple to the point where the safety shut off stays on.
0helpful
1answer

Pitco fryer ignitor lights the pilot but goes out after we let go

Are you holding it in long enough? It takes between 20 seconds-1 minute.

If it still doesn't stay lit, replace the thermocouple.
0helpful
1answer

My pilot light wouldn't stay lit. After lighting the pilot for 2-3 mins. whole frialator would go off including the pilot...

Hi there. Check the hi-limit control, it may be tripping prematurely and needs replacement. Regards.
1helpful
1answer

13 year old pitco frialator fryer pilot wont stay on. changed gas valve and thermopile.... pilot light wont stay lite

Hi there.
Check and tighten all wiring connections.
Check the hi limit for continuity across the terminals using an ohm meter, if it has no continuity, you have to replace the hi limit.
Regards.
1helpful
2answers

Pilot light does not stay on

Hi there.
Try cleaning the thermopile, it must be free of soot or any form of dirt. Ensure that the gas pressure is sufficient, all wiring connections are tight and the hi limit is good.
If all of these are okay and the pilot still wont stay lit, try replacing the thermopile.
For Owner's manual download that will help you in minor fryer troubleshooting and reference, visit http://www.pitco.com
Regards.
0helpful
1answer

Fryer wont stay lit, only two burners will lite, and will only stay lit for about 5 min. will then go out and must start over

Check the gas pressure, it must meet the standard gas pressure written on the nameplate. Check also the quality of pilot flame, poor pilot flame quality will not properly heat up the thermopile which in turn will result in poor fryer operation.
1helpful
1answer
1helpful
1answer

Pilot wont stay lit

If it will not stay lit from a cold start, you will need a thermopile. You can check it if you have a DC meter that will test milivolts. It should be putting out between 300 and 500. If it will not stay lit after the pot gets hot, you will most likely need a high limit. Try pushing the red button below the thermostat. This will reset the high limit.
0helpful
2answers

Pitco fryer pilot out

if you changed the thermopile and still have the same problem make sure that the sensing bulb is directly over the flame. If it is and the thermopile is installed correctly the next thing would be the gas valve.

Hope this helps
Not finding what you are looking for?

296 views

Ask a Question

Usually answered in minutes!

Top Pitco Frialator Kitchen Appliances - Others Experts

Paul Carew

Level 3 Expert

3808 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66831 Answers

Are you a Pitco Frialator Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...