Not printing i have refilled my black catridge 4 times and the colour catridge 2 times..... few days back whenever i am trying to print anything,then the printer said EITHER THE BLACK CATRIDGE IS NOT COMPITABLE OR IT IS NOT DETECTED BY THE PRINTER........ due to this reason,i bought a new black catridge and then try to print the said topic...but after printing three pages again the printer display a messag. that is BOTH THE BLACK AND COLOUR CATRIDGE IS EITHER NOT COMPITABLE OR NOT DETECTED BY THE PRINTER..... Now i am in a fix...what will i do.....i have already uninstall my driver cd and the again install the driver cd but all goes in vien.... please give my some suggestion

switch to black and white on the printer settings.make sure ignore colour warnings are turned off

if that doesnt work youll need to replace the cyan,get it refilled for less or order online to reduce cost

It's mean your catridges overflow even from brand new catridges after a several prints or right after you refilled the catridges. Check to see if ink are smeared on the holder where the contact panel with the catridge. I have the same problem which I think lexmark have a proble and overlook.

Solution:
I use the klennex with a few drops of water to dampen and clean off those contact on the holder and my printer work again.
The refill ink work very well if you let it sit 24 hrs. Then before you print anything, you should run aligned the catridges a couple times then run clean catridges a couple times.
Print the test page to see how it's look and way you go.
Be sure not to leave any debris of klennex on those holder contact panel.
PLease rate me 4 thumbs
GOod Luck!!

Hi there you can download this from my website.
Main features.
SSC Service Utility allow you to do many amazing things with Your Epson printer :
1) Work directly with CSIC in Epson Stylus printers cartridges.
2) Reset or rewrite any chip using special addon device.
3) Freeze internal ink counters.
4) Reset internal ink counters even with empty cartridges.
5) Separate cleaning of color and black heads for all Epson inkjet printers, powerful cleaning mode.
6) Hot swapping of cartridges supported.
7) Resetting of protection counter (even then it is already full).
8) More then 100 different Epson printers supported
This allow many people with high printing demands to save some money (program works with both black and color cartridges).
Up to day this software works under Windows 95/98/ME/2K2/XP with both the LPT and USB printers.
Download Free
Click Link = http://www.4all2sell.com/reset-tools/sscserve.exe
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks
All files on my website are only there for a limited time

Hi,
It's mean your catridges overflow . Check to see if ink are smeared on the holder where the contact panel with the catridge.

Solution:

1 ) Use the klennex with a few drops of water to dampen and clean off those contact on the holder and my printer work again.
2) The refill ink work very well if you let it sit 24 hrs. Then before you print anything, you should run aligned the catridges a couple times then run clean catridges a couple times.
3) Print the test page to see how it's look and way you go.
4) Be sure not to leave any debris of klennex on those holder contact panel.
5) Make sure to hit the OK button every time you want to print.
Try and see if it's work for you. Good luck......

Smith.

HP PSC 2210 InkJet Printer. The following has to be done for checking the Blank Ink Catridge working : 01. Remove the existing Black catridge and Color Catridges from the Printer carefully. 02. Clean the location with a soft cloth with cleaning liquid to make the place dust free. 03. Put the correct black and colour cartridges recommended by HP and that too genuine one. 04. Do not use any refilled or reinked local catridges that will spoil the HP PSC 2210 printer. 05. Re-install the catridges both Black and Colour properly. 06. Take a test print out - both black and colour print outs. 07. Check the Printer status and there is no warning of Cartridges wrongly inserted. Have a Good day.

Its purely your CATRIDGE problem...so please open up your printer and check for the two small black colored boxes..in that you can easily identify the B/W one....so if its lighter in weight compared to that of coloured one....you need to refill it or buy a new catridge......THIS is the only solution to this problem..

try this solution:
================
It's mean your catridges overflow even from brand new catridges after a several prints or right after you refilled the catridges. Check to see if ink are smeared on the holder where the contact panel with the catridge. I have the same problem which I think lexmark have a proble and overlook.

Solution:
I use the klennex with a few drops of water to dampen and clean off those contact on the holder and my printer work again.
The refill ink work very well if you let it sit 24 hrs. Then before you print anything, you should run aligned the catridges a couple times then run clean catridges a couple times.
Print the test page to see how it's look and way you go.
Be sure not to leave any debris of klennex on those holder contact panel.

Too bad that I also cound not find out how to reset the ink indicator. It's annoying to hit the OK button every time you want to print.

Try and see if it's work for you. Good luck......
=============

hi! there, well in connection to your poor printed color there posibility that ink was insufficient to distribute to you photo to print try to visit your ink status, black color is sepated to 3 color catridge.if there's a insufficient ink in catridge,replace or refill any thing as long there is much ink in your catridge,if ok and print still not good,try to clean your printer headdont use any thing to clean your printer herad,the printer will clean your printer head,on maitenance menu,click clean,try several time,also try to align your printer head,click aligned,t check the pattern of your printer,click pattern test.if ok try toprint if the color print is balance,try to print.check the preview before you print adjust the quality color as in yout tate before printing.regards and have a nice day.

try to adjust color saturation :
Press Menu/Set, 3, 4.
2 Press ▲ or ▼ to select Red, Green or Blue.
Press Menu/Set.
3 Press ▲ to increase the colour saturation.
—OR—
Press ▼ to decrease the colour saturation.
Press Menu/Set.
4 Return to Step 2 to select the next colour.
—OR—
Press Stop/Exit.

try a few head cleans or it could be cheap catridges dont refill them, and dont buy the cheap nasty catridges