What is the solution for my nuvo n200. missing I/O program

turn down cd player

Try this link

http://pcsupport.about.com/od/errorh/a/hal-dll-missing-windows-7-vista.htm

What is the solution?
I'm having the same issue.
Nuvo has been installed about 3 months.

check the wires make sure thay are not loose or partial connection

You may have a pair of the cat-5 wires in the incorrect order which is causing a combus fault. Check all your cat-5 connections, ensure they are T568a (GS/G/OS/B/BS/O/BrS/Br).

Let me know if that checks out and we will continue trouble shooting.

Thanks,

That indicated there is a short or incorrect wiring on the combus of the keypads.

Remove the keypads from the walls and unplug them one at a time.

Then unplug one at a time from the all-port until it works.

The last one you unplug will be the offender, inspect the cat-5 crimp for a pair or wires that are in the incorrect order.

Cheers!

Unfortunately it is only available to those who are certified installers/dealers. Nuvo tries to protect those that sell it and does not offer anyway to program it on your own (Unlike Russound that can be done through a keypad by anyone).

I wish I had a better answer but you will have to find a dealer/installer to get you a copy of the software.

Cheers,

Download VLC Player. it will run all the programs or KM Player with inbuild codecs.

I asked Nuvo about this and they said that the RS232 port was never setup for control, it is only to be used for programming when they are initially setup by Nuvo.

I have codes for the Essentia and Grand Concerto that I have written but non for the simplease as Nuvo said it cannot be controlled.

Cheers,

I have the same problem. All keypads blinking in All Off. I changed the fuses on the Nuvo. No luck. Does anyone have a solution to this?