Need tto set time on coleman 40-747 wristwatch

Any1 no the price of the festina chronograph Richard virenque watch

C=SEE THE CATALOG

Hey, I had the same problem with my Coleman watch. It would alarm at midnight. I used the mode feature like the poster before me said. When I got to the alarm "screen" I used the button that backlights the watch's screen. The light came on and the alarm feature was removed. I hope this helps.

it's time for a overhaul and cleaning...the stem may be worn out. Rolexs need this service about every 10 years.

David, Try www.timex.co.uk/manuals.aspx then select your watch

(if this helps you please rate)

CLick mode until you get to time
Hold set button until chime is displayed
Clcik mode again until 12 hr is displayed mode agiain to hr St/sp to to incresse time Reset to Decrease
mode to cycle thru

set to finish

Is the wristwatch a round caseback? If it is you may be able to go to a watchmaker/repairman and have him fit a misc back on it. If it isn't you may have problems finding what you need. As a watchmaker I don't throw ANYTHING out, and most don't. Then go on the internet under pocketwatch repairs. There are a few places that work ONLY on pocket watches inside and out. I will look that up for you. Get ahold of me after you go to the repair shop, will go from there.

I changed the battery and now the chimes and alarms do not work.

If it is the same as mine just hit mode once to go to the date screen then hit start

Instructions for Sharp Alarm Chrono (Digital)

Push "Mode" button until the mode is shown that you want to reset, do this even if the mode you want to reset is all ready showing.

Push "Reset", continue pushes until the desired Parameter (Minute, Hour, or Second) is flashing.

Use "Start" button to advance the digits to the desired setting.

Push "Mode" Button to finish.