Mikomi i bougth a mikomi LK802A keyboard and mouse wireless set in argos today and i instilled it the keyboard is working but the mouse is not working

hi... my mouse is working fine.. but my keyboard does not... please help

I had the exact same problem but with my mouse! the keyboard worked so it obviously was a problem related to connecting to the router (USB)

I later discovered that the LED light on the USB is a button, so click that and click the little circular button on the back of your mouse, then be patient, the mouse should reconnect!

If the mouse and keyboard are working, and the receiver is still flashing constantly, then it's probably just indicating that the receiver is connected to the keyboard and mouse.

hi frd
i think when you have purchase a wireless keyboard and mouse there is an user mannual in-side the box .
you must read it ok what ever...

(1) you plug the batterys which ever is required wheater it is AAA or AA in both key board and mouse.

(2) now plug the senser cabel in mother board in both jack of keyboard and mouse.

(3)now there was a channel selector back side of your keyboard and mouse.

(4) select in both channels same.
(5) now there was a reange search small push button with small nidle item till sencer detect it.

do it untill you can search item

your combo will work

thank you

Here are step by step instructions:

1.Enter disk given with product into CD-ROM
2.Follow installation instructions
3. Enter adapter into computer
4. SEtup settings
5. Enjoy!

These can be used for the webcam to. If my answer helped you rate me! Good luck!

There is no bundled software that comes with the Mekomi RF keybord and the only support is for winddows 98SE. I have looked at other websites and have found sujssions that software drives from the Logitech wesite might work with these keybords hope you have some luck nurdy2453

Mikomi doesn't have its own drivers. You can try using Logitech Setpoint (any version works)
http://www.logitech.com/index.cfm/support_downloads/
downloads/&cl=us,en?selectedcrid=398&selectedcid=152#

Download the one that most resembles your mouse. You can see the various mice from the drop down menu or choose the one that you see in this link..

no!

Don't run the setup program. Instead reboot your computer and use the windows add hardware wizard to install the drivers from the CD. The windows hardware wizard will detect several different devices, allow it to install them all from the CD.

I bought a wireless mikomi keyboard and mouse on my pc which has windows vista operating software, but the keyboard is not working , no light is showing. lettiesmall