ILo tv My iLO LCT32HA36 tv is stuck on standby do you have any soulutions?

Reset your TV. Unplug your iLO TV from the wall and remove any connected devices. Hold the front power button in for five seconds, then release. Plug your TV back in, turn it on and confirm that it is working again.

Read more: http://www.ehow.com/how_5458819_troubleshoot-ilo-tv.html#ixzz2tRuiKHvE

Most new televisions are actually labeling the "power" button correctly. Unless a tv is unplugged, it is never really off. It just goes into a state of standby. This is what you would have called your power button.

Hi there, I came across a website that has the answer for any problem of different televisions including ILO http://tv.manualsonline.com/ex/mfg/headline/m/ilo/d/flat_panel_television/type/product_problem. Hope this helps.

Check the power source?Yes,than the tv power supply board it dead.That the board,where the power a/c cord plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.

AKAI makes iLO TV, here is the service manual, diagrams:
http://elektrotanya.com/?q=showresult&megnev=&megnev2=LCT32HA36&kategoria=tv&kat2=all

Please see my basic troubleshooting guide here:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

http://s807.photobucket.com/home/budm/allalbums

http://en.wikipedia.org/wiki/Capacitor_plague

Parts: www.shopjimmy.com

It could be the power or main board that is giving issues...if your able pull the back off and look for a pin on connector marked PSON or PON...that is line that tells the power board to come out of sleeping and go to work, you should see a change in the voltage when the on button is pushed, if you do then the main is doing its work and its the main if you don't see a voltage change then chances are its the power board

purchased a new tv

http://www.newremotecontrol.com/Mfrs/OtherBrands/Def/dyn_part_data.php?catnum=E7501-056104

Only possible solution!

there is some internal problem, maybe you must reheat the IC's inside or there is probably defective parts. Try if it oscillates if you turn it on by monitoring the collector voltage and it must be around 100 to 135 volts.

There is no code for the television you may be able to use a UN11000 - call 800-726-4405 - Ilo is made by ESI - who also makes the Akai, Viore, and Scott brand tv's.