Driver dell pp25l - Dell Inspiron 13 Notebook

the short answer is no, it was an economy laptop maybe 5 years ago so would not have been equipped with what would have been a very expensive option
Dell Inspiron 1318 review

http://www.expertreviews.co.uk/laptops/47718/dell-inspiron-1318-review

go to intel for display drivers

see if exteral vga works, if this works your inverter needs to be replaced

There may be a tiny hole in the plastic cover on the tray. You can open a paper clip out and insert it in to the hole and push gently, the tray should pop out.

If you do not have a Recovery/restore CD then you can get one from the Dell WEB site.
To reinstall Windows, boot up your laptop with this recovery CD and follow the instructions.

You can download the recovery CD and device drivers from Dell WEB site,the support download page. Make sure you select your model desktop or laptop,better still, type in the Service Tag number, it is printed on the label on thebottom of the laptop and on the back or sides of a desktop. (If the Service Taglabel is missing then go into the BIOS setting and on one of the BIOS pages,the Service Tag number will be displayed). This will open the page where thespecific drivers for your model computer are located. Also make sure you selectthe Windows of the drivers for your Windows operating system. Click on thislink to download the drivers: - http://support.dell.com/support/downloads/index.aspx?c=us&l=en&s=gen

Try another mains power cord. If this does not work then the PA-21adapter is faulty and needs to be replaced.

Hi Tdenton, it must be a problem with the motherboard and the power supply connection. You can have the motherboard replaced by a dell expert technician and you can also check the manual on how to replace the motherboard from this link change motherboard. Hope this can help.

If there is no physical eject button on your dvd drive, you can eject it with your operating system.
Go to My computer and right-click on your dvd drive. Your dvd drive should eject.

Start your pc in safe mode. From there you can remove your previous password and set a new one. thanks

To fix this problem Try Running CHDSK from the windows vista setup cd or reinstall windows or remove any new installed hardware.