Sharp XL-HP515 How do I keep the lights off after I power off?

The manual is here... http://www.manualslib.com/manual/551660/Sharp-Xl-Hp515.html

Hi Russell,
Click the link http://shop.ebay.com/?_from=R40&_trksid=p5197.m570.l1313&_nkw=sharp+xl-hp515&_sacat=See-All-Categories to see the price of that unit.
Hope it may help you.
Give a thumb if you find it useful.
Have a nice day.

If you're using an old-school turntable that doesn't contain a phono preamp that will happen.

A traditional turntable requires a Phono preamp inline with it to PRE amplify and frequency-balance the minute signal produced by it's cartridge for later amplification by a power amp. Most stereo receivers and preamps have Phono connections and internal preamplification strictly for that purpose.

Recent AV Receivers generally do not.

The result would be very low, tinny sound.

If so, you need to get an external Phono Preamplifier.

Some modern TT

take it apart and clean len with a qtip an rubbing achol on face and mirror sides(top and under

dear sir good day you can get it from http://www.dealtime.com/xPO-Sharp-150W-Micro-System-with-5-CD-Changer-2-Way-Speaker-System-Silver-Gray-XLHP515 and if it not cheap you can get a universal remote from any radioshake store thanks

Undo the screws and take the cover of you'll be able to take them out ... But only if you don't have a warranty if u have the take it to the place where u bought it from

Ther clicking is probably coming from a relay and it is cycling because either the power supply itself or possibly an audio output power module has failed, the latter will overload the power supply so it tries to protect itself by interrupting either the AC or a DC voltage supplied by it.
This problem will likely require the hands-on of technical help. 

Compra un disco limpiador de lentes laser y puede que esto solucione tu problema ya que puede ser solo suciedad en el lente.

when it says "hello" do all lights randomly light up? if they do, press "X-BASS"

wait a bit... it will happen with all the other decks, too. we had this happen and the first time the suggestion from the Sharp folks worked. We left the unit unplugged overnight to reset the electronics (and of course all the station presets, etc.) now, we have it happening again and all 5 drawers are out. the "read TOC" then report "no disk". i will try the lens cleaner but if that doesn't work, we will take it to a repair shop. our unit is actually almost 3 years old so it is past the extended two year warranty, but still it is too soon for it to be acting up. i hate cheaply made stuff like this! good luck.