That model number you gave is the motor model number. I can however tell you that motor is a 1.5hp motor. So if your just looking to replace the motor make sure you get a 1.5 hp, with the same service factor as the old one. If your looking to replace the whole pump, then technically any 1.5 horse pump will be fine, but there are several factors you should consider. For example if your running popups, or water features, you want a medium or high head pump. There are many different makes and models of pumps out there, so you have many choices. without knowing your application, hard to recommend a replacement. Also depending on your local, suppliers in different parts of the country will carry different equipment. Hope this helps. If you need further assistance post a reply in the comments, and don't hesitate to leave a good thumb rating if you found this helpful. Thanks, and good Luck!
72 views
Usually answered in minutes!
That number is off the motor portion of the nameplate and is of little use in identifying your pump. There should be a small silver tag with black writing on it that includes the pump model and serial numbers...please post that info if it is available. If not, can you send a picture of it?
John
×