Washing Machines Logo

Related Topics:

Anonymous Posted on Jun 01, 2008

My LG Tromm washing machine WM1812CW keeps coming up with error 0E. how can I fix it.

  • Anonymous Jun 01, 2008

    Check their manual out athttp://us.lge.com/download/product/file/... and look at pages 21-23 to see cause and remedy to problem and error codes

  • Anonymous Oct 23, 2008

    we had the same problem, if you call the service number on your manual they can tell you how to fix it. It only took a few minutes. On another note, does your washer omit a foul smell. It seems to be a problem for many consumers who have purchased LG washers. We've had the problem and when I went to google and typed in LG Tromm Washing machine troubleshooting, one of the sites to pop up was consumer affairs complaints about LG washers. I went to the website and it appears hundreds of people have the same smell coming from their washers. None have gotten any help from LG and are simply told that they are doing proper maintenance. This is a design flaw.

×

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 11 Answers
  • Posted on May 23, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

Joined: May 23, 2009
Answers
11
Questions
0
Helped
2280
Points
38

All front loaders have issues with molding. You can purchase tablets at Best Buy that you use once a month to clean your washing machine. Afresh tablets

A

Anonymous

What do the letters UE mean on my Tromm front load washing machine?? PLEASE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! I P

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How to fix an error code "CE" on my wm1812cw lg tromm front loader5

See if the top will lift up, if so there will be a code and test sheet in there that will lead you to fixing the problem. Very easy to follow.
0helpful
1answer

Lg tromm wm1812cw dum makes load noise when spinning

LOUD NOISES IN MACHINE;

LOT OF THINGS TO CHECK, THE BELT LOOSE OR WORN, THE CLUTCH, THE TRANNY, THE BEARINGS BOTH TUB SEAL AND BEARING, THE REAR DRUM BEARING,
THE DRIVE PULLEY- If the washer is making a loud noise the drive pulley might be worn out, cracked, loose or bent. Remove the drive pulley and inspect it carefully. If it is damaged or defective replace it.
THE TRANSMISSION, THE MOTOR COUPLER, THE MOTOR DRIVE BEARINGS,
THE DRIVE MOTOR- If the washer is making a loud noise the drive motor bearings may have worn out. Washer motors are normally almost silent when they run. If the motor is run without a belt hooked up to it and it's loud it will have to be replaced.

0helpful
1answer

My LG model WM1812CW washing machine is leaking water and says FE in the display

problem with the inlet valve or oppressor switch,because of the overfilling water, sawing FE ERROR
0helpful
1answer
2helpful
1answer

I have an LG TROMM wm1812cw washer. Out of the blue the machine will not spin or drain. It has given an an error code OE

The LG error code OE simply means "the pump is blocked". Presumably the water isn't being emptied properly. As with all error codes it is possible that there is a cause other than the exact description in the error code explanation but basically this error means as far as the washing machine is concerned it thinks the water isn't pumping out. A pump, or filter blockage is the most common cause but it could be caused by other faults such as a faulty pump, or even a blockage in the drain hose or somewhere else in the system etc.


LG themselves have some information on this error code..

http://lgknowledgebase.com/kb/index.php?View=entry&EntryID=6273

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.
1helpful
1answer

Drum will not spin

I unplugged the machine for 1 hour and the computer reset, and it is working fine
Not finding what you are looking for?

1,011 views

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29492 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...