Washing Machines Logo

Related Topics:

Question about AEG Washing Machines

1 Answer

AEG LAVAMAT 400F

Posted by ebi2003 on

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Hi daer i need instructinos of AEG LAVAMAT 400F in enghish please help me
thanks

Posted on Dec 25, 2010

5 Related Answers

Anonymous

  • 1463 Answers

SOURCE: AEG Lavamat 1000

hi

dont know if this is the one you need AEG 1000 Washing Machine
you may need to scrool down to download the manual .


riz.

Posted on Mar 03, 2008

Anonymous

  • 326 Answers

SOURCE: I need cogs for my aeg lavamat where i CAN GET IT?

you can get it at  www.repairclinic.com

Posted on May 06, 2009

beltronic205

Gerry Harvey

  • 1482 Answers

SOURCE: AEG Lavamat 6250 - opening door?

Try spoon handle gently prise open

Posted on Nov 12, 2009

Anonymous

  • 174 Answers

SOURCE: aeg Lavamat 64840 programme stops at 1 minute.

The main PCB, before sending the door aperture signals, checks for the following conditions:
• The drum must be stationary (no signal from the tachymetric generator)
• The water level must not be higher than the lower edge of the door
• The temperature of the water must not be higher than 40º C.
Automatic release device
In the event of a power failure, or if the appliance is switched off using the ON/OFF switch, or if there is a
fault in the solenoid valve, the bi-metal PTC cools within a period of between 55 seconds and about 4
minutes (at a temperature of 65°C), thus releasing the door.

if after swiching off for longer than 5mins and the door lock does not unlock the lock must be faulty.

Posted on Jul 16, 2010

Anonymous

  • 90 Answers

SOURCE: My AEG Öko Lavamat 86800

unplug it for a while and then plug it back and see what happens.

Posted on Dec 17, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Why AEG Lavamat 88840 Front Load Washer doesn't spin?

either the pump is blocked so cant pump water out so stops program.or brushes in motor worn down(both cheap fixes)
0helpful
1answer

What means c1 on aeg oko lavamat 74500

Hello!

Error C1 on AEG Lavamat usually means that there is a trouble with water filling. The required water level is not reached.

I reccomend you contact your local Service
Force Centre.

Here is the link to a manual of a similar AEG Lavamat waching machine (a "trouble shooting" part). Hopefully, it will help!
http://manualsbrain.com/ru/manuals/1793433/?page=30
0helpful
1answer

AEG Lavamat 64809 error code E30

Lavamat?! Where in the *&%^ is this machine from? Yugoslavia! I'm guessing it will not allow water IN Because only the Spin (Centrifuge) cycle works?! So if that is so you need your water inlet valves replaced, there are Two. Even in machines named after a Bar of Soap!

If you need further help, reach me via phone at https://www.6ya.com/expert/steven_b77d19396bfe2249

0helpful
1answer

What's your problem?I ASK FOR THE HANDLE OF THE DOOR OF THE AEG WASHING MASHINE LAVAMAT 400F

Hi from retired Englishman in SW France,

Sorry, this FixYa Washer Forum does not supply service centre numbers, engineers, spares or spares sources, software, installation instructions or prices; it is just made up of ordinary guys and gals, probably at home, from all over the world, with experience of addressing problems and giving guidance for free on the web ;-0)
You will either have to search in your local telephone directories OR stay on line and search for '(make) washer service' for instance or '(make) washer spares' and hope that you can find someone reasonably local.
Sorry again ;-0(

If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck!
John C
0helpful
1answer
0helpful
1answer

AEG lavamat 6955 sensorlogic, was showing F2,nowF3

Waited half hour; on start up F3 had cleared..pump overheat? Suspect sticky pump bearing..new pump.
0helpful
1answer
0helpful
1answer

AEG Lavamat 74800 stops part way through the cycle - Error E50

I suggest trying this link. They will help you online.

https://www.justanswer.com/uk-appliance/23fl9-aeg-lavamat-74800-error-50-reported.html
0helpful
1answer

Operating instructions lavamat 538

type in ' AEG lavamat 538 ' into the top right hand address bar on your pc and you will find links that will give you all the instruction manuals you need... AEG is at the lower end of the list....
Good luck

sue
1helpful
1answer

AEG Lavamat 1000

hi

dont know if this is the one you need AEG 1000 Washing Machine
you may need to scrool down to download the manual .


riz.
Not finding what you are looking for?

1,273 views

Ask a Question

Usually answered in minutes!

Top AEG Washing Machines Experts

Brad Brown

Level 3 Expert

19166 Answers

john h

Level 3 Expert

28836 Answers

W.L.

Level 3 Expert

2511 Answers

Are you an AEG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...