Problem
Error 1203 ; 1203 error message; 1203 cartridge error; Cartridge short error
Solution
Overview
The 1203 error message is caused by either a communication failure between one of the printheads (cartridges) and the All-In-One (AIO), or by a short in one of the printheads.
Resolution
Troubleshooting a Communication Error between the Cartridge and the Printer
click on this link and follow the steps listed, hope this helps!
http://support.lexmark.com/index?page=content&id=SO3683&actp=search&viewlocale=en_US&userlocale=EN_US&segment=SUPPORT&productCode=LEXMARK_X5495&searchid=1286737658844
Please leave rating ;) thanks
SOURCE: Dell Printer 924 error #1203
go to page 59 of the manual ("http://support.dell.com/support/edocs/systems/924/en/om_en/om_en.pdf" if you don't have it) look for
code 1203 in the middle of the page. good luck!
SOURCE: error 1203
1. Press Power to turn your All-In-One off.
2. Unplug your All-In-One from the wall outlet.
3. Plug in your All-In-One.
4. Reinstall the cartridges.
If this does not resolve the problem, replace your cartridges to fix the problem.
SOURCE: Lexmark printer problem. Printer is not printing shows error 1203
Hi
Error 1203 Dell 962
There can only try and I hope it will do the job for you.
Error 1203 is an issue that occurs either when a cartridge is bad or the printer cartridge Slot is bad...
1 - try cleaning the copper contacts of the both carts and cart slot in the printer and try again..
or
2 - when error shows up, shut the printers power off; wait one minute and turn it back on press copy
you may need to Reset Factory Defaults
SOURCE: cartridge error 1203
Hi. Your printer may be having difficulty recognizing the cartridges. Here's an article in the Lexmark website to troubleshoot the problem. Just click on this link. http://bit.ly/cYolo3 . Hope this resolves the problem.
595 views
Usually answered in minutes!
×