I like to have canon 1250U2F scanner driver for windows7

There are no drivers for Win 7 64bit for this. You should be able to use the 32 bit drivers. This is the support page on Canon webpages for this scanner. Just click on the downloads link and select the operating system The only win7 drivers are for 32 bit. It will either use those or it is not compatable with 64bit. You can contact Canon support and see if they have a work around. They are pretty good at helping so don't hesitate to ask them. Just use the contact us or support contact links to get hold of them. Try the 32 bit drivers first. That should get you going. The lack of drivers for Win7 is not uncommon for lots of devices that used to be supported. This is not just scanners but all sorts of things and all of the manufacturers. You can blame Microsoft driver certification for this.

Here is the link.

http://www.usa.canon.com/cusa/support/consumer/scanners/canoscan_series/canoscan_3000ex

The driver support site is here:

http://www.usa.canon.com/cusa/support/consumer/scanners/canoscan_series/canoscan_n670u#DriversAndSoftware

But i am sorry to tell you that the driver does not exist
for your system.

You can try to download the Vista driver
and select compatible mode when you install the driver.

Hope this was helpfull.

http://support-asia.canon-asia.com/
download here

canon scan n1240u will work on Win7


here's how:

go to this site: http://www.usa.canon.com/cusa/support/consumer/scanners/canoscan_series/canoscan_n1240u#DriversAndSoftware

click "Drivers and Software" then select OS "Windows XP" then download "WIAdriverN670UN676UN1240U.EXE"

Install the WIA driver on your Windows 7 OS and used only mspaint to capture image on the scanner


TWAIN doesn't work on Win7 but WIA still does

Good Luck!

hi

go to following link you will find your patch for windows7

http://downloadnew.org/software/canon-scanner-driver-f910111/

Go to the manufacturer website to check for download drivers for your unit.

Only Vista. Comparability mode?
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=351&modelid=8741

I just called Canon. They said they don't have the scanner driver for Windows 7 x64. It is in development, but could not give me a time frame when it would be done. They suggested checking back on their website periodically.

Here you go

http://software.canon-europe.com/products/0010013.asp

Where is the unlock button on the umax astra 2100c scanner?? I can't find it! Help!!