Have a avr 4802 nothing is on but standby light will not come on at all how do I reset

Register and download the manuals for free at retrevo.com

http://www.retrevo.com/support/Denon-S-302-Home-Theater-Systems-manual/id/7046dj484/t/2/

http://www.retrevo.com/support/Denon-AVR-4802-Receivers-manual/id/363ag815/t/2/

Page 10. The S-302 uses a proprietary D-Sub25 system cable to the DSW-S302 subwoofer. Don't know if or why it has more than 2 active conductors. The other speakers have removable cable ends so they might work just fine.

Hi - If you mean can you run/switch a 1080P video source through the receiver, then the answer is no. It can only switch through the video component connectors on the receiver (1080i) but it's not a problem you can just connect your new BR player directly into the TV (HDMI) and have the audio handled by the receiver. It's a common setup and you're not really losing anything. It's the setup I have.
Enjoy your new great BR experience!!

Regards, Mikeywaf

you need to find a headphones, put a drop of contact cleaner on headphone plug and plug it into receiver's h/p input several times. It cleanes internal h/p connector contacts and unit will work fine. If doen't help the receiver most likely has bad h/p connector soldering.

check if left speaker is shut off /connections one speaker my be on a side the other on b side check all speaker connections

Switch off the unit and remove the AC cord from the wall
outlet.

Press and hold the DIRECT buttons and STEREO buttons, and
at the same time, plug in the AC cord.

Check that the entire display is flashing with an interval of
about 1 second, and release your fingers from the 2 buttons

That will default the unit

It will not work. This unit can not convert video signal from component to s-video. Use the same type of connections on DVD and TV.

I guess you could try y cable adapters for input on the Denon. Might get messy. Try radio shack and pick up 5 y cables for the speakers and 1 for the sub. Someone probably makes an audio switcher that handles that as well.

If Denon blu ray has coaxial or optical out for audio, then your Denon receiver will process this signal and will give you 7.1 out sound.

I have a AVR - 2802 and was working fine. One fine morning when i started the system there was no sound everything is functioning well except the sound. I checked the speaker connection and the connectiion seems to be perfect. Is there any lock in the system? Can someonetell me how to release the lock.