HP Business Ink jet 1200. Yellow cartridge lite is on. Changed cartridge, but lite is still on,

Try to change ink jet cartridge with a new one from hp and then blow off the contacts with compressed air. Make sure the tape is removed from the nozzles of the ink jet cartridge before installation.

Good luck on this repair.

you can try realigning the printer, first remove and plug the cartridges this may happen due to problems with the cartridges itself.. :)

You may be using non original ink catridges, the printer chip will not recognise so flashes as if needs replacing.if refills are original printer chip may need to be reset.

If you only just purchased your cartridge I would suggest you return the cartridge for an exchange. Unfortunatelty when a cartridge has expired the date is set inside the cartridges chip and so far I have not come up with a way to get around it. You will need to replace the cartridge with a new one.

Hi, Follow the instruction mentioned in Figure 5 or Figure 6 (Explanation and recommended action) form the following link:-http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=448666&prodTypeId=18972&prodSeriesId=448666&objectID=c00001211

Hi,

The new cartridges comes with seal wrapper on nozzle, have you remove it or not, if you have already remove it the reinstall the ink cartridges and try to print.

Regards

Ashly82

if you use fast draft than you can take approx 150 else in any other prefrences it will give upto 120 pages per cartridge. so use proper setting as per the requirement.

u check ur head is working properly i think this main error of head where u insert balck vartrige if u have same printer then u have check replace the black cartrige find out it work properly then sure ur balck head is damage

Change your system date to backward and you can use it again

Are you using HP branded ink?