Mmc card on my nokia 9300

Welcome to Fixya

This process erases from your Nokia 9300 all of your user data and settings, including your phone book, calendar, email, downloads, recordings, and certain factory installed programs such as Instant Messaging and BlackBerry Connect.

REMEMBER: Create a device data backup or synchronization before formatting.
You can restore device data and settings later. See the Nokia 9300 User Guide for further instructions.


STEP 1 - Format the Nokia 9300 memory

* Remove the battery for 10 seconds
* Replace the battery
* Open the Nokia 9300 to view the inside display
* When you see the screen with "NOKIA" in blue text,
* Press and hold the following four keys until a Format Message is displayed:
CRTL + Shift + F
* Confirm the process by selecting Format
* Formatting will begin
* After formatting is complete the Nokia 9300 will reboot with some basic settings. If prompted, accept the request to reboot
* Follow the instructions on your Nokia 9300 to set the time, date and city and to enter your contact information.

STEP 2 - Download the install-cingular-default-603.SIS to a compatible PC.

STEP 3 - Prepare a Multimedia Memory Card (MMC)1

* Transfer the .sis file from your PC to your device using MMC, data cable, Bluetooth or infrared. For instructions see the Nokia 9300 User Guide.

STEP 4 - Install the file install-cingular-default-603.SIS to your Nokia 93002
Note: This step is required to install Cingular specific settings and programs to your Nokia 9300.

* Insert the Multimeda Memory Card created in Step 2 to your Nokia 9300.
* Replace the battery cover (so the Nokia 9300 can read the MMC)
* Open your device, then open the File Manager:
Press the Desk application key
Scroll to and select Office
Scroll to and open File Manager
* Using the arrow keys, scroll to Memory Card
* Highlight the file install-cingular-default-603.SIS
* Press Open to start the installation process
* Follow and accept all prompts and requests
* Reformatting is now complete

(1) You may choose to install the file above using Nokia PC Suite. Please see the Nokia 9300 User Guide for general instructions to install software using Nokia PC Suite, and follow those instructions instead of Step 4 above.

(2) CAUTION: The .sis file above is ONLY intended for use with a Nokia 9300 with the appropriate software version. DO NOT install this file to a Nokia 9300 with any other software version. DO NOT install this file to any other model device.

Have a good one!

Take a backup of your MMC to your pc and then format your MMC and then insert it if its asking any password put 00000 or 12345. Mostly it wont ask you a password.then restore data to MMC

This process erases from your Nokia 9300 all of your user data and settings, including your phone book, calendar, email, downloads, recordings, and certain factory installed programs such as Instant Messaging and BlackBerry Connect.

REMEMBER: Create a device data backup or synchronization before formatting.
You can restore device data and settings later. See the Nokia 9300 User Guide for further instructions.


STEP 1 - Format the Nokia 9300 memory

* Remove the battery for 10 seconds
* Replace the battery
* Open the Nokia 9300 to view the inside display
* When you see the screen with "NOKIA" in blue text,
* Press and hold the following four keys until a Format Message is displayed:
CRTL + Shift + F
* Confirm the process by selecting Format
* Formatting will begin
* After formatting is complete the Nokia 9300 will reboot with some basic settings. If prompted, accept the request to reboot
* Follow the instructions on your Nokia 9300 to set the time, date and city and to enter your contact information.

STEP 2 - Download the install-cingular-default-603.SIS to a compatible PC.

STEP 3 - Prepare a Multimedia Memory Card (MMC)1

* Transfer the .sis file from your PC to your device using MMC, data cable, Bluetooth or infrared. For instructions see the Nokia 9300 User Guide.

STEP 4 - Install the file install-cingular-default-603.SIS to your Nokia 93002
Note: This step is required to install Cingular specific settings and programs to your Nokia 9300.

* Insert the Multimeda Memory Card created in Step 2 to your Nokia 9300.
* Replace the battery cover (so the Nokia 9300 can read the MMC)
* Open your device, then open the File Manager:
Press the Desk application key
Scroll to and select Office
Scroll to and open File Manager
* Using the arrow keys, scroll to Memory Card
* Highlight the file install-cingular-default-603.SIS
* Press Open to start the installation process
* Follow and accept all prompts and requests
* Reformatting is now complete

(1) You may choose to install the file above using Nokia PC Suite. Please see the Nokia 9300 User Guide for general instructions to install software using Nokia PC Suite, and follow those instructions instead of Step 4 above.

(2) CAUTION: The .sis file above is ONLY intended for use with a Nokia 9300 with the appropriate software version. DO NOT install this file to a Nokia 9300 with any other software version. DO NOT install this file to any other model device.

Since you want to format the phone you can follow this steps in doing that:

Method One
Verify that your phone does not have a discharged battery. Charge phone until battery icon shows a full charge.
Save all personal information to the MMC memory card. Turn off the Nokia 6600 and remove memory card.
Simultaneously press the green dial key, the "*" key and the "3" key. Continue to hold those three keys while turning on the phone. Do not release the three keys until the formatting message is displayed on the screen.
Wait for a few moments while the phone reformat. Once completed, the phone will be restored to fresh out-of-the-box store defaults.
Reinstall personal information from the MMC memory card.

Method Two
Verify that phone does not have a discharged battery. Charge phone until battery icon shows a full charge.
Save all personal data to a removable memory card. Turn off phone and remove memory card.
Turn on phone. When phone is fully powered up, key in the following sequence, "#7370#". Answer "Yes" when phone asks if you really want to format phone.
Enter pass code "12345" when the Nokia 6600 asks for the confirmation code.
Wait while phone reformat. The process may take a few minutes.
Replace the memory card and restore personal data.

pls help me how to format 6233

no there is no any master password for mmc.
you need to bye a mmc eraser from electronic mkt to format your mmc or u can go to cell phone repair shop to get formatted (note: you can not retrive you data from lockd mmc)

Try resetting the phone (taking the battery out).

If that doesn't work, clear all your recent calls
(Telephone-Recent Calls-Clear All)

You may also need to check your other phone memory.
Do you have a decent sized MMC card in the phone? Try moving all your pictures/music/videos etc from the phone memory to the MMC card. Use File Manager to do this.

PC suite is your best bet. If you have no joy, you can try copying all the files from the phone to the MMC card and then using a PC card reader to get the text off. It's not easy, and for me the PC considered many of the files on the card to be corrupted. DO NOT FIX ON THE PC AS IT WILL THEN BE UNREADABLE ON THE PHONE.
Try using File Manager to copy the Communicator\System\Mail folder to the MMC card and see how you get on. Take what you can get which doesn't appear corrupted!

The default security code for Nokia is 12345.

You can recover the password. The best way is to download a file manager to your phone. I use Best Fileman for my N70, from http://www.smartphoneware.com/ It's for series 60and 40. The trial version should be enough, it's only £5.60 anyway.
In the file manager (when installed on your phone) you'll find under- C:\System\mmcstore -the file you're looking for, you have to rename the file- mmcstore.txt -then send it to another mobile (best way) or your PC via bluetooth or USB, open it on the other phone and your password will be revealed.
Rename that file- mmcstore.txt -to just- mmcstore -there might be another file named- mmcstore.txt -to view your password rename one or the other- mmcstore1.txt -one is for your phone PIN number the other your MMC card.
Clear enough?