Philips 55 inch rear projection tv

power module

turn down the picture level the blue line goes away

This is a common problem with this TV set. You can get the parts, chips, and instructions to fix it your self from www.TvRepairKits.com

i have a manual and can send it via email

try to adjust the focus from the back inside the tv it may be out of whack because of the focus

I have 50" philips magnavox big screen. I recently started to have a problem with the edges of my tv. They became blurry. the center of the tv is clear and the edges are blurry. what should I do to fix this problem.

hi it sounds like it may be tripping(not taking drugs)were the protrection curcuit detects a fault eg excessive current.and goes into shutdown mode(protection mode)and makes several atemts to switch on and will continue tripping untill the fault clears.in order to norrow the fault down one would isolate differnt parts of the curcuit utill trhe tripping stops you then know the conponent/panel area were the fault lies or it can be a dry joint (needs soldering hope it helps and tell me your knowoldge

Does the power indicator blink? If so how many blinks is it blinking before it goes out?

General IIC error. An experienced technician will have to repairthat problem, as you need specialized equipment.

it seems as you need your tubes re-alinged dont get riped off by tv experts saying it will cost you loads if you have a screw driver and a gentl touch just re focus your red green and blue-simple cost you nothing