My hp m 1522nf printer is 52 scaner error - HP LaserJet M1522n MultiFunction Printer

The scanner initialization did not pass it seems. Try cleaning the glass and white background.

If that doesn't work, the scanner bulb may be faulty - try replacing it.

The 52 error in most HP printers is not reversible, you must replace the scanner if the is cost worthy.Might want to unplug printer from the power source for 30 minutes and retry, before changing the scanner unit.

52 Scanner Error
The all-in-one has experienced an internal hardware error.

1. Turn off the power by using the power switch, and then wait at least 30 seconds.
2. If a surge protector is being used, remove it. Plug the all-in-one directly into the wall socket.
3. Check the FFC connection between the formatter and the scanner.
NOTE Do not bend or fold the FFCs during the removal or reinstallation process.
4. Try connecting the product to a different power source or surge protector.
5. Turn on the power and wait for the all-in one to initialize.
6. If the error persists, replace the laser scanner assembly.

52 error is a scanner error.

Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the product to initialize.

If a surge protector is being used, remove it. Plug the product directly into the wall socket. Use the power switch to turn the product on.

If the error persists, contact HP. For contact information, see www.hp.com/support/ljm1522 or the support flyer that came in the product box.

This indicates a problem with the copier scanner, for more deatails follow the provided lnk.

Scanner Error 5 CLICKHERE

First see the scaner moving or not just power on the printer & see the movement if it stucks then problem with scaner this printer should be under warrenty pl call the service engr from hp /change the flatbed scaner.ur problem may be resolved.

is a site, may help you:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=pt&cc=br&taskId=110&prodSeriesId=3442750&prodTypeId=18972&prodSeriesId=3442750&objectID=c01558499

You need to be a little bit more specific nex time, the error 49 its normally related to an internal communication error between the DC Controller and the formatter board on the unit
Now we need to know if the problem appear when scanning, copying, printing, sending or receiving faxes
Heres some troubleshooting you can follow, its going to clear this error 49 most of the cases :
1. Turn off the product.
2. Press and hold both the down arrow button and the Cancel button, and then turn on the product.
3. Wait until the message Permanent storage init. appears, and then release the buttons.
4. When the printer comes back to ready, go to hp.com and download the latest firmware update for this 1522nf

if you need more assistance you can contact me at :
[email protected]

unfortunately, you have a bad SCANNER BLOCK, it would cost more to replace it than a new fax machine. Sorry

The printer has burned a scanner assembly. The part number is RM1-2033-030CN. The part is extremely expensive in relation to the printer cost. ($182.00 @ HP)

I would recommend surfing ebay for an HP Laserjet 1022 printer as it is the cheapest printer that has the same scanner. Even a dead 1022 will work as they tend to either have formatter or fuser issues when dead. A scanner error on your printer or the 1022 is extremely rare.

I have included a link to the HP 3050 service manual for you that will walk you through it step by step. The teardown is significant however very do-able by the novice with the service manual.

http://h20181.www2.hp.com/plmcontent/NACSC/Printers/LaserJet/30328_020806/course/library/service/service.html

Good luck, You can do it.