What's error 6005? - Epson laser Printer EPL-6200L Laser

E9 - Communication defect inside user interface.
Only the affected zones are subsequently displayed with an
"E" in the cooking phase display and are thereby disabed. The
other zones can still be used.
Replace User interface.

Dado

troubleshooting guide in manual usually lists this info.

Try this link:

https://www.support.xerox.com/support/workcentre-c2424/support/enus.html

Hi NavyGirl1,
Your PC should have 4 SATA slots whereby you can attach your old HD to the new PC and copy the files across to your new hard drive.

Let me know if you need any further help
Best wishes,
Graemevm

9 BeepsNine beeps means that there has been an AMIBIOS ROM checksum error. Literally, this would indicate an issue with the BIOS chip on the motherboard. However, since replacing a BIOS chip is sometimes impossible, this AMI BIOS issue is usually corrected by replacing the motherboard.
Use utility tool like RegInOut to repair corrupt registry files and keep your computer safe from being damaged.

you can down load a manual from this link
http://safemanuals.com/user-guide-instructions-owner-manual/ELNA/6005-_E

There is below the link to ELNA 605 User's Guide:
http://safemanuals.com/user-guide-instructions-owner-manual/ELNA/6005-_F

when i install bloetooth driver iam getting 6005 error message
as clean the temp folder
close the running programeslike that
plz solve this

stitch no. 29 "F "foot 7.0 width 0.4 length tension 2-3