Remote does not work no picture in middle of screen

Hi,
All that mess in picture is due to failure of convergence output chips in this tv.
Replace convergence output ICs (two ICs) to solve picture problem. Required ICs are available in Part Store, click the link to have price info.
Thanks.

does it have a automatic convergence,,in the menu

is the model # listed as PT-47WX51 correct??

Replace c7136 & c7154 on A board This should clear up your problem

was your tv hit hard,a non magnetically shielded speaker set on top or under it?

type in PT-47WX51 manual in your search bar and there is an online manual from fixya. It will take you through setting up your tv.

Hi, thank you for visit fix ya.
Can you provide me model number tv, please?.
Thank you

more than likely something came loose when moving it. check all plugs and connectors first.

TV's have a circuit that monitors the high voltage and shuts down the set if it senses something amiss.
On projection types, figure on just replacing the entire board that has the flyback transformer on it.
Hope ya fix it!

Your TV most likely has a Convergence Chip Failure ( common problem )

Here are some of the most common symptoms and example photos of a convergence problem

• Screen looks 3D
• Colors don't line up
• One or more colors can't be adjusted when using the convergence menu.
• Screen is bowed or warped.

Solution #1

You need to replace the convergence chips and convergence resistors. Check the site www.TvRepairKits.com. They have put together convergence repair kits for most models.

The kits include a photo instruction guide, original OEM Sanyo STK chips, convergence resistors, pico fuses, thermal paste, etc. Everything you will need to do the repair yourself.