I dont know how to program my remote to my tv. I have programmed it before but it doesnt work anymore. Or at least I forgot how to program it.

Visit this site "Electro-help". Type in the site name in yahoo search. It has all details you want. Codes, setup proceedings etc:- Pull up older posts there.

http://www.ehow.com/how_4771669_program-operate-tv-dont-code.html
Programing Remote step-by-step

for as long as it is a universal remote it will work with any appliances

hold down tv button and power button together until the lcd light turns on. then press the play button every 5 seconds until your tv turns off. press reverse every 2 seconds until it turns back on. press stop to save the programming code.

i dont know how to program the remote for tv..i got the codes

It doesnt look like anybody has the programming instructions for this remote. I found one just like it called the RRUNV. go here to see details. It does come with instructions on how to program. http://www.replacementremotes.com/store/productdetailp.cfm?productid=60267

I had the same problem and typed in the model of my vcr instead of the remote model. This is the site I found, although my tv is not on the list, I followed the steps at the bottom of the page and found that code 08 worked for my Phillips TV. I hope this helps all of you with finding your codes and programming your remotes.
http://www.remotecodelist.com/remotes/sharp/sharp_vch982.html

sharper image jumbo remote can't get it to program my philips/magnavox tv.

What is the model# and manufacturer of your remote? Most of the time you can access the remote codes from the manufacturer of your tv to program into the remote... let me know the manufacturer. thanks!

is the remote still working on the vcr??? if so then simply take out the batteries for a few minutes and reinstall and reprogram the remote for the proper tv. if it doesnt work then the remote is bad and a new one avail on line or at universal one can be used The oart # for the Sylvania is N9211UD