I have a Casio jf-200tu and I had programmed it with the old tax rate now I cant get it to re-progame with the new tax rate. help please

Page 11 of the Manual should help you.

Set The Date; Set The Time; Tax Table Programming - Casio ...

https://www.manualslib.com > ... > User manual

Casio CE-6000 Manual Online: set the date, Set The Time, Tax Table Programming. P G M C-A32 Reg2 Reg1 Off Rf Pgm Mode Switch 7. Set The Time.

Press AC press and hold [RATE SET] for two seconds, "SET" will appear on left of screen. Press TAX+, type in the new tax rate, press and hold [RATE SET] for two seconds, then press AC.

The other departments or PLUs have not had tax selected. If you look in dept and PLU programming, you will find an option to apply TAX1, TAX2 etc.

********************
If anyone needs a manual for a Sharp XE-A20s, there is one here:

http://the-checkout-tech.com/manuals/cashregisters/Sharp_XE-A20S_operating_programming_manual.html

Hi,

Bingo!! that's right. The steps are :-

KEY PGM
3 SUB-TOTAL
0125 SUB-TOTAL
( New Tax ) CASH
5002 CASH
SUB-TOTAL
KEY REG

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Hello I cannot find your model but here is the complete list of how to program the tax rate from Casio business support.

http://www.casio4business.com/sa/support/taxtable_programming.html

Let me know if this helps.

How do I program tax rate into my calculator?
Non-printing models (also applies to HR-8TE printing calculator):

1. Press [AC]
2. Hold [SET/%] key for about 2 seconds
3. Press [TAX+]
4. Input the tax rate
5. Press [SET/%]

I'm in Australia and only going on the program manual for your area, it states that canadian tax is tax on tax? if this is true then you probably entered a code for add on or add in tax and thereby changed it all.

you need the following

tax table address
1 125
2 225
3 325
4 425

rounding off codes
rounding off to 2 decimal places is 50
rounding up to 2 decimal places is 90
cut off to 2 decimal places is 00

tax system code
tax table with out tax rate 01
tax table with tax rate and add on rate 02
add in tax rate 03
Canadian tax-on-tax rate 04

starting point
to get the starting point you multiply by 100 and subtract 1
eg 50 cents = 0.50 X 100 - 1 = 50 - 1 = 49
eg $4 = 4.00 x 100 -1 = 399

to program the tables go through these steps

go to program 3
tax table address eg 125
subtotal
tax rate
ca/amt tend
starting point eg 0.50 = 49
ca/amt tend
rounding eg 50
tax system eg 04
ca/amt tend
ca/amt tend

here you have 2 choices,

press ca/amt tend to go to the next tax table ie 225 and start over by entering the tax rate and go through the procedure again

or

press subtotal to finalise the tax table you are on

Hope this helps,

Adam

1. Press [AC]
2. Hold [SET/%] key for about 2 seconds
3. Press [TAX+]
4. Input the tax rate
5. Press [SET/%]

Press AS
Hold Down RATE SET (%) for about 2 second and the correnty rate appears on the display
Imput the conversion rate and the press rate set (%) to store it in memory.
Best regards
Alberto

step 1 pess the AC button step 2 press and hold for two seconds the % button step 3 press the tax+ button step 4 input 6 step 5 press the % button that should be the tax set you can check it is set correctly by pressing the AC button and then the tax+ and 6 should be displayed