While playing a cd it skips to aux I have to scroll down to cd to keep it playing

turn off the radio, then push the volume knob in until a menu comes up. I think the first option is changing time, push the knob to the right to go through the menu and you will see AUX:off, push the knob up to turn it on. good luck!

You have to go into the standby menu and turn aux on. Go to standby, push menu button and scroll down to aux and turn on

Here's what they don't tell you: AUX isn't automatically an option when you scroll through the SRC button. You have to turn it on. I know, I know...stupid. I had to contact Kenwood (the maker of the unit) directly to get an answer.

• First, press the SRC button repeatedly until it displays STANDBY.
• Then hold down the Menu button until MENU is displayed.
• Next press up or down on the right control knob, to scroll up or down, until AUX OFF is displayed.
• Next hold the right control knob to the left or right until Aux switches on.
• Now just press the Menu button to exit.
• AUX will now be an option when you scroll through the SRC button

hi there
open up your dash get 1 short RCA cable (red and white) male ends on them
now place the red and white RCA into the back of DVD in-dash player next step the aftermarket CD player should have 2 rca plugs that say aux put the other end red and white RCA cable that you just put into DVD unit into the aux inputs on back of CD player when this is done reinstall both units back into the dash now on your CD player press the source button till aux appears once this is done you will hear the DVD player sound...........now if you press the source button and no aux appears......hold down the source button till the CD player powers off...........once CD player is off hold down the F (function) button till beep or unit turns on a display use the skip buttons or F (function) button to go threw features once you get to aux turn aux to on now hold the source button down again till unit powers on normally once this is done press source button again till you find aux........if you get sound and the TV doesn't work let me know and ill guide you to get that running too (if there are no aux RCA plugs on the back of CD player) let me know (sometimes there is a headphone looking plug on back of CD units) if what i told you doesn't work let me know the brand of CD player you have so i can give you correct setups I'm only going by your in-dash DVD player right now
hope i was able to help get you sound

Hi guys, just figured out how to hook up your Ipod to the above mentioned stereo, Here is how...

- Put your stereo in STBY mode, then push the menu button, scroll up or down and you get different options to change clock and AUX settings, my AUX was OFF and I had to select ON. Now you can push your Sorce button (the one that puts the stereo in STBY) and you will have the AUX option this will allow you to play your MP3 players and Ipods. ENJOY!

I spent a few hours looking for this very explination so I hope this saves the rest of you some time. Safe driving.

hmmmmm is the CD scratched? if you transfer it to the computer, then to the MP3 and the CD is scratched then it comes out all wonky but if the CD is scratched then just ignore it, and heres how you can tell that its the CD not the MP3 ;
some songs are not scratched if all were scratched then the MP3 doesn't work properly.

and thats it

http://www.free-service-manuals.com

Have heaps of manuals. Do a search.

for the "AUX input" source put it in standby mode and hold menu... scroll down to "aux in" and turn it on by pushing right

Try putting the unit in standby via the "SRC" button FIRST..., then press the menu button and cycle through to the "AUX 1" option and activate this....then press menu button again. When the unit is next switched on, you should have an "AUX" option accessible via the "SRC" button which will cycle through all of the availale modes ....standby-tuner-cd-aux etc etc.