Re: Panasonic sb-wa 340 active subwoofer has just low...
This is normal operation.. The subwoofer will only play sounds below a set frequency...There may be a crossover setting in your menu that you can adjust the frequency cutoff to your liking.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Of the Phillips is not a home theatre system them you can but you will have no volume co trol of the sub. If it is the alot of philips home theater in a box (htib) use special plugs...you would need to change the cable end of the sub to a compatible plug.
Yes... and no...sort of. The blue/gray wires can connect to a normal front channel (or rear) just like any other speaker would. However, the red/black (low frequency) need to connect to a dedicated LF connection. Most receivers don't have this output. What you could do is order a Low Pass filter and install it in line with any channel of the receiver you're not using. If the receiver has A/B speakers selectable then you should use the B output to this channel using the low pass filter (I'd order a 200Hz low pass filter .. PartsExpress has many lowpass filter options plus you can call them.
Thes Theater in a Bx systems are highly proprietary as evidenced by the unique interconnections. Mix n match is DIScouraged if not actually dangerous to the components.
It's never a good idea to adapt prescribed connectors to bare speaker wire or vice versa.
Speaker Level and Line Level signals are worlds apart and equipment damage may result. Your Denon (model unknown) probably requires a POWERED SUBWOOFER, to which it would provide Line Level LFE from its Pre Out.
Read the manual where it doesn't say to convert a speaker wire to RCA.
As you can probably tell from the very different connector types on the subwoofer and the HTS, they don't match up. That speaker system and this electronics are not meant to be used together.
The SC-BT200 uses passive subwoofer while the SB-WA342 is an active (powered) subwoofer.
×