I recently was given a Henery Kloss Model 88 Radio. No sound comes from the speakers other than a faint sound. I cranked up the speakers to 99 but still no volume. There is a clicking noise as if the speakers work but the amplification isn't. Anyone know what to do?

If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Search the site by type in the brand name of your device, in the "Search box at the top right of the Home page display" to see the set-up codes to your device, with different brand remote controls.

speakers magnets not getting full power, speakers are shot, wiring from radio to speakers come loose or partially broken, radio not putting out enough power to speakers, controls of radio not set correctly

did anyone one behind dash recently...sounds like speaker plug in disconnected from back of radio

I think the only battery are on remote controlbattery with a 3 volt CR2032 battery.

Could be bad TEA5711T AM/FM smd chip at tuner card.

Ile

Look on ebay, craigslist, and check local junk yards, nka auto recycling centers, and you will find many plain jane stock GM radios for sale cheap. i would stay away from the high end units as then you will be on here asking for instructions on how to reset the anti-theft codes.

Hello mlyssa,

Here's a link to the color codes for the '99 Olds 88.

Since there are other model years for the Olds, yours may be different. Other model years are on the list at the right.

Hope this helps.

Sounds like a cold dry joint connection problem internally ,needs to be serviced

I have exactly the same problem but found two work arounds, either one that I am completely satisfied. 1. unplug and replug the AC.
2. I have a subwoofer, when I plug the subwoofer cable half way in, the sounds of the base speak goes back to normal (but not all the way in)

go to tv menu> sound settings> enable surround.