At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Is it fitted correctly does it have a good earth check fuse on back of stereo check fuse under dash and also under hood if it has one there try holding the reset button for 15 secs
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It is important to know if your battery is holding 12v. Because it turns off when mech is used can mean your battery is low and radio is pulling too much current. If you tested this with another battery or on a power supply and continues to happen, this is an internal issue.
in one side of the laser lens got a litle potentiometer you can move it clockwise to up the sensitivity of the laser and if with this don´t work the laser lens need to be replaced
You need to open your stereo for manually clean the laser lens.With cotton Qtip wet in isoprophilic alcohol clean the laser lens then with the dry part of the qtip clean the residues of the alcohol.The lens look like an fish eye.
was there a pop or anything, if so it could of been the audio chip in the radio,
also depending on the type of car, does it have f factory amp to? best way to troubleshhot this is if you have a seprate speaker you could hook up to a lead off the back of a deck :-)
×