Hi f this is the correct solution for your safe, and not a obsbox-so-plus-us_1 network adaptor please follow these instructions, your safe should come with a pre-set number with the default code of "159-A".To change the code, first open the safe. On the inside of the door near the hinge,
there is a small red "reset" button press this button until the Yellow LED on the front panel lights up Now input your new code, one that you can remember this can be up to 8 characters, then followed by either "A" or "B". The Yellow LED will flash to indicate that your new code has been
accepted. If however the Yellow LED does not flash, the code has not been accepted, and you must start over test your new combination before closing the door also make sure to have the Override Key available when setting a new combination or changing batteries, in case the door doesn't open again with the new set code...hope this helps.
Hi. Your best solution may be to take the safe to a local locksmith. Take the keys and also take 2 forms of ID. The locksmith will open the safe and change the combo to whatever you want. J.
You think you do have the keys? If you do, you should be in luck to reset the combination, but if you meant to type that you do NOT think you have the keys that could be a real issue. Please confirm, do you have the keys for the unit or not?
Thanks
Tim
Ok you have two options here:
It shows you rated my answer already? Let me test this response to verify...
Ok that's what I thought, it went back to normal. When you have the key inserted and the door is open you should be able to set the code. You may have to call Harbor Freight for more information on resetting the code if that doesn't work. It appears Bunker Hill is only sold through Harbor Freight and all customer issues go through them. If anything, visit a local store, check out the manual from one of the safes there, in the box... and check how to set the code to what you want. I can't find this information anywhere, it's very strange!
http://www.harborfreight.com/store-finde...
That will locate the nearest store to you...
If possible please come back to the question here and click the Accept
This Solution button, otherwise I don't get credit for the help
provided.
Thank you so much,
Tim
There should be an Accept This Solution button you can click
If you can't find it just don't post another comment and it will auto-close itself out in a week.
Thanks
Tim
how can i open my bunkers hills safe p45891
×
1-800-444-3353. They are distributed by Harbor Freight. This may be their phone number. In any case, they have technical info.
http://manuals.harborfreight.com/manuals/45000-45999/45891.pdf
This is the manual.
Gary
3,329 views
Usually answered in minutes!
Yes, I do think I have the keys. There are 2. I am work today and not with my safe.
Thank you, Bob
Thanks! I will try it when I get home.
Toni
I do accept this solution. The "159" got it open, but don't know how to reset password, or will this number always open it? Thank you, thank you!
Toni
Yes, I am so happy! Thank you for all your help. I will recommend you.
Toni
Yes, a accept this solution. It works! Thanks again. Toni
Yes, 4 thumbs up! Thanks, Toni
I couldn't remember by combination and Fixya.com answered my question and told me how to open by safe and reset the password. Thanks, I didn't have to resort to a crow bar!
Stupid safe,,,batteries are inside the safe, so when they go out and you get tghe red and green lightt while trying to open it, it is tie to change the b atteries, which are inside thesafe. duh,.
I had to have it drilled open from the bottom to get the door to open. and change the batteries.
×